AicaigouB2B Wiki

Rectangular/Square Duct

Updated: 2026-11-20

Overview

Rectangular and square air ducts are standardized components in HVAC systems, engineered to optimize airflow in constrained spaces where round ducts are impractical. Their flat surfaces simplify installation along walls or ceilings, making them ideal for commercial buildings, factories, and multi-story structures. These ducts are fabricated from sheet metal (often galvanized steel or aluminum) or composite materials like fiberglass. Their rectangular/square cross-section allows higher airflow volume per unit area compared to round ducts, though they may generate slightly more friction loss.

Structure and Working Principle

Constructed from folded metal sheets joined with Pittsburgh locks or TDC connectors, these ducts maintain rigidity while minimizing air leakage. Internal baffles or turning vanes are sometimes added to reduce turbulence at bends. Airflow efficiency depends on the aspect ratio (width-to-height). A 1:1 (square) or low-ratio rectangular design ensures balanced pressure distribution, while high-ratio ducts (>4:1) require reinforcement to prevent collapsing under negative pressure.

Key Features

Material options cater to diverse needs: galvanized steel resists rust, aluminum suits lightweight applications, and fiberglass-lined ducts provide thermal insulation. Custom flanges (e.g., slip-and-drive or angle rings) enable modular assembly. Fire-rated variants include intumescent coatings, while antimicrobial-treated ducts are used in hospitals. Noise reduction is achieved via internal acoustic liners or external insulation wraps.

Application Areas

Predominantly used in commercial HVAC systems, these ducts serve office buildings, shopping malls, and industrial facilities requiring high-capacity airflow. Square ducts are preferred for vertical risers due to space efficiency. Specialized applications include laboratory exhaust systems (chemical-resistant coatings), kitchens (grease-proof stainless steel), and cleanrooms (seamless construction to prevent particulate accumulation).

Maintenance and Precautions

Regular inspections should check for loose joints, corrosion, or dust accumulation—especially in hospital/kitchen ducts where biofilm growth poses health risks. Use robotic cleaners for inaccessible sections. Ensure supports are spaced per SMACNA standards (e.g., every 4-6 ft for small ducts) to prevent sagging. Always follow local fire codes for smoke damper integration and penetration seals.

B2B Procurement Guide

Bulk purchases typically involve custom fabrication based on CAD drawings. Lead times range from 2-6 weeks for made-to-order units. Key specifications include gauge thickness (16-22 GA for steel), flange type, and static pressure class (e.g., Class 1 for ≤2" WG). For cost efficiency, group orders by similar dimensions to minimize material waste during production. Preferred suppliers should offer BIM-compatible models and LEED-compliant material certifications.

Related Manufacturers