Overview
EPDM grafted terpolymer (EPDM-g-MAH) is a chemically modified form of ethylene-propylene-diene monomer (EPDM) rubber, where maleic anhydride (MAH) is grafted onto the polymer backbone. This modification enhances its compatibility with polar materials like nylon or polyesters, making it invaluable for adhesion and blending applications. The grafting process introduces reactive sites, allowing the polymer to bond with other materials more effectively. It retains EPDM's inherent properties—such as UV resistance and flexibility—while adding functional groups for improved performance in demanding environments.
Physical and Chemical Properties
EPDM-g-MAH typically appears as white to light-yellow granules or pellets. Its density ranges from 0.85 to 0.90 g/cm³, and it exhibits low solubility in water but dissolves in solvents like toluene or xylene. The grafted MAH groups provide polarity, enabling hydrogen bonding with other polymers. Key advantages include thermal stability up to 150°C and resistance to ozone, acids, and alkalis. The graft ratio (MAH content) directly affects adhesion strength, with commercial grades offering 0.5–2.0% MAH by weight.
Main Applications
Primarily used as a compatibilizer, EPDM-g-MAH bridges non-polar EPDM with polar plastics (e.g., nylon) in automotive parts like bumpers and hose covers. It also serves as an adhesion promoter in sealants for construction and as a modifier in thermoplastic vulcanizates (TPVs). In adhesives, the grafted MAH reacts with amines or hydroxyl groups, forming durable bonds. The material is favored in wire/cable coatings due to its insulating properties and flexibility across temperature extremes.
Safety and Storage
While EPDM-g-MAH is generally stable, dust inhalation should be avoided. Use gloves and goggles during handling, and ensure adequate ventilation. Storage recommendations include keeping the material in sealed containers at temperatures below 30°C to prevent clumping or degradation. Disposal should follow local regulations for synthetic rubbers. Incineration may release carbon monoxide; landfill disposal is discouraged due to slow biodegradation.
B2B Procurement Guide
When sourcing EPDM-g-MAH, prioritize suppliers that provide technical data sheets specifying graft ratio, melt flow index, and ash content. Bulk purchases (500+ kg) often reduce costs by 10–15%. Sample testing is advised to confirm compatibility with your base polymers. Consider regional logistics: imported grades from the US or EU may offer higher consistency but at a premium. Verify certifications like REACH or RoHS if compliance is critical for your end-use market.
Related Manufacturers
- 主营：改性助剂、相溶剂、增韧剂、接枝料、丁晴橡胶粉、各类粉末、流变剂、油性水性液体橡胶
- 主营：LDPE、TPE、TPU、三元乙丙、PET、POM加铁氟龙、PP、PTT、降解料、丁腈橡胶
- 主营：胶黏剂、增硬剂、通用料、接枝料、液体橡胶、相容剂、pa尼龙粉、溶剂型TPU、透明Tpu
- 主营：PP、LLDPE、LDPE、HDPE、TPU、POM、EVA、PBT、PC、PC红外光学塑料、ABS、SEBS、MS、PET、TPE、PA6、PA12、PA66、PC/ABS、液体橡胶、改性材料、金发科技、浸塑粉、塑料助剂、降解材料
- 主营：EPS粒子、相容剂、增韧剂、马来酸酐接枝级EPDM、液体橡胶、粉末丁腈橡胶、功能助剂、工程塑料、部分通用塑料
- 主营：PE粉、ABS、液体橡胶、三元乙丙相容剂、丁腈颗粒、聚乙烯、PC、HDPE、PA6、PA66尼龙原料、SEBS、PVC、TPE、PMMA、PCTA、LDPE、LLDPE
- 主营：PET粉、液体顺丁橡胶、羧基丁腈橡胶、固体三元乙丙、TPU粉、塑胶原料、EAA粉、环保降解塑料、特殊工程塑料、各种塑胶粉料、各种液体橡胶
- 主营：液体橡胶、橡胶粉末、塑料粉末、接枝料、改性助剂、工程塑料、通用塑料
- 主营：粘结剂、阻燃剂、哑光剂、ema增韧、聚合物、彩色母、缠绕膜、色母料、交联剂、密封条、sbs沥青、润滑剂、增白剂、防刮花、开口剂、改性剂、光亮剂、聚乙烯、增韧剂、cpp薄膜、硅酮粉、除臭剂、pvc板材、阻燃料、色母粒
- 主营：嵌段共聚物、合成磷脂、荧光染料、三元乙丙橡胶、PEG、点击化学、量子点
- 主营：无纺布、滑石粉、特氟龙、epdm、耐溶剂、粘合剂、热熔胶、共聚物、耐酸碱、相容剂、超细粉、氟乙烯、锂电池、299涂料、活塞环、细微粉、聚丙烯、喷涂粉、玻璃珠、润滑油、sma树脂、粘接剂、蒸煮袋、润滑剂、铝塑膜、增稠剂