Overview
Wire inner film is a specialized polymer-based material applied as a protective layer inside wires and cables. It serves as a critical component in electrical and communication systems by providing insulation, preventing moisture ingress, and enhancing mechanical durability. The film is typically extruded or laminated during cable manufacturing. Common base materials include polyethylene (PE), polypropylene (PP), and fluoropolymers like PTFE, selected for their dielectric properties and chemical resistance. The film thickness typically ranges from 0.05mm to 0.5mm, with customized formulations available for high-voltage or extreme environment applications.
Physical and Chemical Properties
Wire inner films exhibit low electrical conductivity (high resistivity >10¹⁴ Ω·cm) and dielectric strength (15–500 kV/mm). Their flexibility allows bending without cracking, with elongation at break exceeding 300% for some formulations. Thermal properties vary by material, with operating temperatures ranging from -60°C to +200°C for premium grades. Chemically, most films resist acids, alkalis, and oils but may degrade under prolonged UV exposure. Flame-retardant additives are often incorporated to meet safety standards like UL 94. Density and melting points correlate with crystallinity—for example, LDPE films melt at ~110°C while PTFE withstands up to 327°C.
Main Applications
Primary use is in power cables (LV to HV), telecommunications (fiber optic buffers), and automotive wiring harnesses. In data cables, the film minimizes signal interference through controlled impedance. Specialty applications include oil-well cables (chemical-resistant films) and aerospace wiring (lightweight, high-temperature films). The film also acts as a separator in multi-conductor cables to prevent short circuits. Recent developments include eco-friendly bio-based films and self-healing variants with microcapsulated repair agents. In renewable energy systems, these films protect solar panel wiring from environmental stress.
Safety and Storage
Most wire inner films are non-hazardous under normal conditions but may emit toxic fumes if burned (e.g., hydrogen fluoride from fluoropolymers). Dust generation during cutting requires ventilation. Storage recommendations include 15–25°C temperatures at <60% RH to prevent adhesion or deformation. Films should be kept in original packaging until use to avoid contamination. Shelf life is typically 2–5 years for standard formulations. For flammable materials (e.g., some PE films), fire safety protocols must be followed during bulk storage. MSDS sheets should specify handling procedures for each formulation.
B2B Procurement Guide
Key specifications to verify include dielectric constant (target <2.5 for high-frequency use), thickness tolerance (±5% standard), and compliance with RoHS/REACH. For harsh environments, request salt spray or UV resistance test reports. MOQs range from 1,000m² for standard films to full-container loads for bulk orders. Leading manufacturers include DuPont (Teflon films), Borealis (PE grades), and regional specialists like Jiangsu Dewei in Asia. Sample testing is recommended to evaluate adhesion to specific cable materials. Price breaks typically apply at 10,000m²+ quantities. Consider co-developing custom formulations for proprietary cable designs.
Related Manufacturers
- 主营：Pa66、通用塑料、工程塑料、聚丙烯、聚乙烯、POM、聚甲醛、亚克力、弹性体、EVA、PP、PC、LDPE、LLDPE、TPE、TPEE、TPU、PC/ABS、粉料、GPPS、HDPE、PBT、SEBS、PETG、PA12
- 主营：氟塑料、PVDF、通用料、线材内膜料、离子交换树脂、铁氟龙、ETFE、工程塑料、抗氧剂、EAA、PE、EVA、PQ固化剂、PA
- 主营：PPA、PC、PP、注塑级PP、挤出级PP、PP吹塑、HDPE吹塑、注塑级PC、注塑级PPS、注塑级PA66、注塑级PA6、注塑级ABS、LDPE薄膜料、PP注塑专用料、PA46、PARA、PES、PPSU、PMMA注塑、POM注塑专用