Overview
White light interferometry (WLI) is a non-contact optical metrology technique that exploits the short coherence length of white light to perform high-resolution surface measurements. Unlike laser interferometry, WLI can measure discontinuous surfaces and provide absolute distance measurements without phase ambiguity. The technique originated in the 1980s and has become essential in nanotechnology and precision engineering. The experiment typically involves splitting white light into reference and measurement beams using a Michelson or Mirau interferometer configuration. When the optical path lengths match within the coherence length (typically micrometers), interference fringes appear. By scanning vertically and analyzing the fringe envelope, surface height variations can be determined with nanometer precision.
Key Features
The primary advantage of white light interferometry is its ability to measure rough surfaces that would cause speckle in laser-based systems. The short coherence length acts as a natural optical sectioning mechanism, effectively filtering out unwanted reflections. Modern systems achieve vertical resolutions down to 0.1 nm and can measure surfaces with slopes up to 70°. Another critical feature is the technique's insensitivity to vibration compared to phase-shifting interferometry. Since measurements rely on fringe envelope detection rather than phase, they're less affected by environmental disturbances. The broadband light source also eliminates the periodic errors inherent in monochromatic interferometry, enabling absolute distance measurements over ranges up to several millimeters.
Application Areas
In semiconductor manufacturing, WLI systems inspect wafer flatness, measure etch depths, and characterize chemical-mechanical polishing results. The technology can detect sub-nanometer surface defects critical for advanced node IC production. MEMS manufacturers use it to measure membrane thicknesses and structural dimensions of micro-devices. The optics industry employs WLI for testing aspheric lenses, measuring coating thicknesses, and verifying surface roughness of precision optical components. In mechanical engineering, it's used for wear analysis, tribology studies, and quality control of machined surfaces. Emerging applications include biological sample measurement and photovoltaic cell inspection.
Precautions
Successful white light interferometry requires careful system alignment to ensure the reference and measurement arms have equal optical path lengths at the focus position. Vibration isolation is critical, though less stringent than for phase-shifting interferometry. The sample surface should have sufficient reflectivity (typically >4%) to produce detectable interference fringes. For thin film measurements, the material's refractive index must be known to convert optical path differences to physical thickness. Transparent or semi-transparent samples may require specialized analysis to separate surface reflections. Environmental temperature fluctuations should be minimized as they affect mechanical scanning components and can introduce measurement drift.
B2B Procurement Guide
When selecting a white light interferometry system, first define your measurement requirements: maximum sample size, necessary vertical and lateral resolution, and surface types (rough, smooth, transparent, etc.). Consider whether you need dedicated hardware for specific applications like wafer inspection or lens testing. Evaluate the system's scanning mechanism—piezo-electric stages offer nanometer positioning but limited travel, while motorized stages provide longer range with slightly reduced resolution. Software capabilities are equally important: look for advanced analysis features like stitching for large areas, thin film analysis modules, and compatibility with industry standards like SEMI for semiconductor applications.
Related Manufacturers
- 主营：实验仪器、激光器实验仪、激光原理实验仪、仪器定制
- 主营：共面性测试仪、接触角测量仪、表面张力仪、超低界面旋转滴张力仪、TX500C、非接触粗糙度扫描仪、影像测量仪、细菌口腔显微镜、金相显微镜、高温真空接触角测量仪、水滴角测量仪、焊球共面性测试仪、超景深显微镜、磨刀机显微镜、粗糙度仪、体式显微镜、一键式闪测仪、熔深检测显微镜、旋转滴界面张力仪、全自动接触角测量仪、倾斜接触角测量仪、XR-14、机械稳定性测试仪
- 主营：传感器、解调模块、压力解调、工业解调仪、光栅解调仪、法珀腔解调、传感分析仪、光纤传感器、光纤传感