Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Waterproof Through-wall Threaded Rod

Updated: 2026-08-02

Overview

Through-wall waterproof threaded rods are essential fasteners for construction projects requiring watertight structural connections. They combine the strength of traditional threaded rods with specialized waterproofing features, such as coatings or integrated seals, to prevent water infiltration at penetration points. These rods are widely used in civil engineering, particularly in environments exposed to moisture, such as underground structures, water treatment plants, and coastal infrastructure. Their design ensures long-term durability while maintaining structural integrity under load.

Structure and Working Principle

止水螺杆 厂家直营穿墙丝杆通丝防水螺栓批发建筑三段式止水 螺杆河北峰领紧固件制造有限公司

The rod consists of a threaded steel shaft (fully threaded or partially threaded) with a waterproof barrier, typically achieved through coatings (e.g., epoxy, PVC) or compressible seals (e.g., rubber gaskets). The threading allows for adjustable anchoring, while the waterproof layer blocks water passage. Installation involves drilling a hole through the wall, inserting the rod, and tightening nuts on both sides to compress the sealant. This creates a watertight joint while distributing load evenly. Some designs include flanges or washers to enhance sealing performance.

商家经验真实案例 · 安全可信
土工布一亩地用多少
本文解析土工布在农田应用中的用量问题,包括不同场景下的用量差异、影响用量的关键因素,以及如何合理规划使用量,帮助农户实现经济高效的铺设方案。

Key Features

Corrosion resistance is a critical feature, with materials like stainless steel or galvanized steel offering protection against rust in humid or saline environments. Waterproofing is ensured by coatings or integrated gaskets that expand under pressure. High tensile strength (typically 400–700 MPa) allows these rods to bear heavy loads without deformation. Adjustability is another advantage, as the threaded design accommodates varying wall thicknesses. Some variants include anti-vibration features to prevent loosening over time.

Application Areas

Primary applications include basement retaining walls, tunnel linings, bridge abutments, and marine docks, where water leakage must be prevented. They are also used in industrial settings like water tanks, sewage systems, and hydropower plants. In pre-cast concrete construction, these rods secure panels while maintaining waterproofing. Their versatility extends to temporary structures, such as cofferdams, where quick assembly and disassembly are required without compromising seal integrity.

Maintenance and Precautions

建筑地下室管廊用三段式止水螺杆 双头通丝防水丝杆穿墙杆沧州鑫弘盛建筑器材有限公司

Regular inspections are recommended to check for coating wear or seal degradation, especially in high-stress or corrosive environments. Damaged seals should be replaced promptly to maintain waterproofing. During installation, avoid cross-threading or excessive torque, which can compromise the waterproof layer. Use compatible sealants (e.g., silicone for stainless steel) and ensure surfaces are clean and dry. For marine applications, consider sacrificial anodes to enhance corrosion protection.

商家经验真实案例 · 安全可信
脚手架尺寸:安全搭建的黄金法则
本文解析脚手架关键尺寸的奥秘,从立杆间距到步距高度,再到平台宽度,用通俗语言讲解安全搭建的实用技巧,助你轻松掌握脚手架安全搭建的核心要点。

B2B Procurement Guide

When sourcing waterproof threaded rods, prioritize suppliers with certifications like ISO 9001 or ASTM compliance. Specify material grade (e.g., A4-80 for marine-grade stainless steel), diameter (commonly M12–M30), and length requirements. Bulk purchases often reduce costs, but verify storage conditions to prevent coating damage. Request samples to test sealing performance under project-specific conditions. Lead times may vary based on customization (e.g., non-standard threading or coatings).

Related Manufacturers