Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Water-based Cleaning Agent

Updated: 2026-07-19

Overview

Water-based cleaning agents are formulated to replace traditional solvent-based cleaners, offering an environmentally friendly alternative. They primarily consist of water, surfactants, and mild alkalinity agents, making them suitable for removing oils, greases, and particulate contaminants. These cleaners are widely adopted in industries requiring stringent cleanliness standards without compromising safety or sustainability. Their adoption aligns with global environmental regulations, such as REACH and VOC emission controls, as they minimize hazardous waste and air pollution. Unlike solvent-based cleaners, water-based variants do not contribute to ozone depletion and are often biodegradable, reducing long-term ecological impact.

Physical and Chemical Properties

远犇 无铅环保 精密针筒锡膏 存储稳定 焊点均匀光亮东莞市远犇科技有限公司

Water-based cleaning agents typically exhibit a neutral to slightly alkaline pH (7-10), ensuring compatibility with metals, plastics, and elastomers. Their low viscosity and surface tension allow deep penetration into intricate parts, enhancing cleaning efficiency. The absence of volatile organic compounds (VOCs) eliminates flammability risks and workplace exposure hazards. Key additives like corrosion inhibitors protect sensitive surfaces, while surfactants emulsify contaminants for easy rinsing. Some formulations include chelating agents to neutralize hard water ions, preventing residue buildup. Performance is often temperature-dependent, with optimal results achieved at 40-60°C.

商家经验真实案例 · 安全可信
50管套丝机调多少
本文解答50管套丝机的调节问题,包括常见调节范围、影响因素及操作建议,帮助用户掌握调节技巧,确保工作效率和质量。

Main Applications

In the automotive sector, these agents are used for engine parts degreasing and pre-paint surface preparation. Electronics manufacturers rely on them for flux removal and PCB cleaning due to their non-conductive properties. Aerospace applications include turbine blade cleaning and composite material maintenance. Medical device manufacturers value water-based cleaners for sterilizing instruments without corrosive effects. They are also employed in food processing equipment cleaning, where non-toxicity is critical. Their versatility extends to 3D printing support removal and optical lens cleaning.

Safety and Storage

博慕优材XM22B室温硫化密封剂 航空专用 24小时固化 强密封性北京柯华三维科技有限公司

While water-based cleaners are inherently safer than solvents, proper handling is essential. Use PPE (gloves, goggles) for concentrated solutions, and ensure adequate ventilation in confined spaces. Spills should be contained and diluted with water to prevent slippery surfaces. Storage life ranges from 6 months to 2 years, depending on formulations. Avoid freezing, as crystallization may destabilize additives. Bulk containers should be kept sealed to prevent evaporation or contamination. Disposal follows municipal wastewater guidelines unless local regulations specify otherwise.

商家经验真实案例 · 安全可信
油基钻井液优点
本文详细分析油基钻井液在高温稳定性、润滑性和井壁保护方面的突出优势,帮助读者理解其在复杂地层钻探中的重要作用。

B2B Procurement Guide

Industrial buyers should prioritize suppliers with ISO 9001 certification and technical support for application testing. Request material compatibility data sheets (e.g., for anodized aluminum or painted surfaces). Volume discounts are common for orders above 200 liters, with drum (20L) and IBC (1000L) options available. Consider concentrates for cost savings, but verify on-site dilution capabilities. Custom formulations are available for niche applications, such as high-pH versions for heavy grease. Evaluate total cost of ownership, including rinsing water consumption and waste treatment requirements.

Related Manufacturers