Overview
The volume resistivity tester is an essential instrument for material scientists and quality control engineers working with insulating materials. It measures a material's inherent resistance to electrical current flow through its volume, expressed in ohm-centimeters (Ω·cm). This parameter is critical for applications where electrical insulation properties determine product safety and performance. Modern testers combine precision electronics with user-friendly interfaces, offering both manual and automated testing modes. They are widely used in industries such as electronics manufacturing, aerospace, and automotive, where material dielectric properties directly impact product reliability.
Structure and Working Principle
A typical volume resistivity tester consists of three main subsystems: a guarded electrode assembly, a high-voltage DC power supply (usually 100V–1000V), and a sensitive current measurement circuit. The electrode system employs a three-terminal configuration (main electrode, guard ring, and counter electrode) to eliminate surface leakage effects. The instrument operates by applying a known voltage across a standardized material sample (often 100mm diameter, 2–4mm thickness) and measuring the resulting current. Resistivity is calculated using the sample's geometric dimensions and measured resistance values. Advanced models incorporate environmental chambers to control temperature and humidity during testing.
Key Features
High-end volume resistivity testers offer features like automatic polarity reversal to cancel thermoelectric effects, built-in data logging for traceability, and compliance with major international standards (ASTM D257, IEC 60093). Some models integrate resistivity and surface resistance measurement capabilities in a single unit. Measurement ranges typically span from 10^3 Ω·cm for slightly conductive materials to 10^16 Ω·cm for high-performance insulators. Resolution of 1% or better is standard for industrial-grade instruments. Modern units often include USB/Bluetooth connectivity for data export and PC-controlled operation.
Application Areas
Primary applications include quality control for plastic films used in capacitor manufacturing, verification of cable insulation materials, and development of potting compounds for electronic components. The automotive industry uses these testers to evaluate materials for high-voltage battery systems in electric vehicles. In research settings, volume resistivity testers help develop new polymer formulations with tailored electrical properties. The construction industry employs them to assess insulating materials for power transmission equipment. Test data often appears in material datasheets and regulatory compliance documentation.
Maintenance and Precautions
Regular maintenance includes electrode cleaning with isopropyl alcohol, verification of calibration standards (typically 1×10^4, 1×10^8, and 1×10^12 Ω resistors), and inspection of high-voltage cables. The test environment should maintain stable temperature (23±2°C) and relative humidity (50±5%) for reproducible results. Safety precautions mandate proper grounding of the instrument and use of insulated tools when handling samples. Operators should discharge samples completely after testing, as high-voltage capacitors in the system may retain dangerous charges. Annual calibration by accredited laboratories is recommended for compliance purposes.
B2B Procurement Guide
When sourcing volume resistivity testers, buyers should first confirm required measurement ranges based on their material specifications. Key selection criteria include measurement accuracy (±5% or better for industrial use), compliance with relevant industry standards, and availability of technical support. Consider total cost of ownership, factoring in calibration services, spare electrodes, and software updates. For high-throughput environments, automated sample handlers and barcode readers can significantly improve efficiency. Leading manufacturers include Keysight Technologies, Hioki, and Trek, with Chinese brands like SPSJ offering cost-effective alternatives for basic applications.
Related Manufacturers
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：[]
- 主营：质构仪、滴点仪、粘度仪、测定仪、色度仪、水分仪、硬度仪、四球机、密度计、粘度计、自燃点仪、凝点倾点仪、闪点仪、馏程仪、沸程仪、油脂氧化稳定性仪、烟点仪、酸值仪、结晶点
- 主营：电位滴定仪、农药残留检测仪、尘埃粒子计数器、光合作用测定仪、果蔬呼吸测定仪、食品安全检测仪、残氧仪、酸价过氧化值检测仪、大米重金属检测仪、浮游菌采样器、atp荧光检测仪、大豆蛋白仪
- 主营：农药残留检测仪、食品安全检测仪、土壤养分检测仪、光合作用测定仪、稻谷新鲜度测定仪、直链淀粉测定仪、脂肪酸值测定仪、兽药残留检测仪、程控定量封口机、牛奶分析仪、酶标仪、土壤肥料养分检测仪、土壤研磨机、微波消解仪、气相色谱仪、红外分光测油仪、食品重金属检测仪、辣度检测仪、液体密度计、油液颗粒计数器、凯氏定氮仪、电位滴定仪、病害肉检测仪、拉曼光谱仪、水质检测仪
- 主营：强力机、织物强力机、透气仪、表面点对点电阻测试仪、日晒色牢度老化仪、透湿仪、拉力机、织物缩水率、医用防护服、过滤效率检测、计数器传感器、医用口罩气体、恒温恒湿试验箱、恒温烘箱、儿童玩具测试仪、色牢度仪、耐磨起球、防水性仪器、电磁静电类仪器、阻燃类仪器
- 主营：颗粒计数器、颗粒度检测仪、硅酸根分析仪、闪点测定仪、运动粘度测定仪、微量水分测定仪、酸值测定仪、界面张力测定仪、馏程测定仪、开口闪点测定仪、闭口闪点测定仪、卡尔费休水分测定仪、抗乳化测定仪、泡沫特性测定仪、蒸馏测定仪、硫含量测定仪、密度测定仪、凝点倾点测定仪、凝点测定仪、液相锈蚀测定仪、空气释放值测定仪、腐蚀性硫测定仪、折管粘度测定仪、便携式溶解氧分析仪
- 主营：开口闪点仪、闭口闪点仪、颗粒计数器、运动粘度测定仪、酸值测定仪、微量水分测定仪、馏程测定仪、界面张力仪、露点仪
- 主营：测试机、仪测试、检验机、测定仪、测验仪、护目镜、卫生巾、astmf2992、测定机、耐磨仪、强力仪、nbs橡胶、织物胀、卫生纸、老化箱、检测仪、灼热丝、试验机、试验仪、纸尿裤、能检验、呼吸气密、测试温度、口罩耳带、性测试仪
- 主营：食品安全检测仪、农药残留检测仪、大豆蛋白仪、光合作用测定仪、土壤呼吸测定仪、尘埃粒子计数器、凯氏定氮仪、电位滴定仪、程控定量封口机、土壤养分检测仪、红外CO分析仪、红外测油仪、浮游菌采样器、残氧仪、COD消解仪、超微量分光光度计、生物毒性检测仪、液体密度计、闪点测试仪、微波消解仪
- 主营：食品安全检测仪、水质检测仪、土壤养分检测仪、光合测定仪、闪点测定仪、农药残留检测仪、微波消解仪、蒸馏仪、余氯检测仪、浮游菌采样器、微生物采样器、微生物检测仪、油液颗粒计数器、负氧离子检测仪、氮吹仪、叶面积测量仪、COD检测仪
- 主营：土壤养分检测仪、食品安全检测仪、程控定量封口机、光合作用测定仪、土壤呼吸测定仪、叶绿素测定仪、蜂蜜检测仪、COD检测仪、农药残留检测仪、土壤检测仪、多参数水质检测仪、浮游菌采样器、兽药残留检测仪、水质检测仪、微波消解仪、荧光定量pcr仪、牛奶分析仪、植物蒸腾仪、微生物检测仪、悬浮物检测仪、气相色谱仪、液体密度计、尘埃粒子计数器、辣椒素检测仪
- 主营：测定仪、电缆耐压测试仪
- 主营：击实仪、筛析仪、检测仪、测定仪、测试仪、探钎机、集装箱、试验机、试验仪、阻力仪、振摆仪、大于40cm、uv紫外线、防水材料、水泥浆体、石材耐磨、电线电缆、塑料哑铃、水泥标准、砖石水泥、狄法尔磨、电动脱模、稳定度仪、压力泌水、胶砂流动
- 主营：食品安全检测仪、土壤养分检测仪、农药残留检测仪、光合作用测定仪、果蔬呼吸测定仪、土壤呼吸测定仪、尘埃粒子计数器、红外测油仪、乳品分析仪、超微量分光光度计
- 主营：电缆故障测试仪、串联谐振、变压器变比测试仪、测定仪、高压试验设备、互感器综合测试仪
- 主营：沥青仪器、土工布实验仪、粗粒土实验仪、表面体积电阻率测定仪、路强仪、固结仪、鼓风干燥箱、砂浆抗渗仪、水泥检测仪、压力试验机、抗折抗压一体机、管材检测仪、防水卷材检测仪、门窗性能检测、保温性能检测、搅拌机、标准养护室、养护箱、恒温溢流水箱、振实台、实验夹具、实验室仪器、胀破强度试验