Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Voltage Transformer

Updated: 2026-07-15

Overview

Voltage transformers (VTs) are essential components in electrical power systems, designed to provide accurate voltage reduction for instrumentation and control circuits. They isolate high-voltage primary circuits from low-voltage secondary circuits, enabling safe measurement by standard devices like voltmeters and protective relays. Unlike power transformers, VTs operate at minimal load, ensuring precise voltage proportionality (typically 1:1 or higher step-down ratios). They are classified into electromagnetic (inductive) and capacitor voltage transformers (CVTs), with the latter often used in high-voltage transmission systems above 100 kV.

Structure and Working Principle

Maris SpA Flli Hi-Tech复合材料挤出机塑料加工皕赫科学仪器(上海)有限公司

A typical VT consists of a primary winding connected to the high-voltage line and a secondary winding linked to measurement devices. The core is made of laminated steel to minimize eddy current losses, while windings use copper or aluminum for conductivity. When alternating current flows through the primary winding, it induces a proportional voltage in the secondary winding via electromagnetic induction. The turns ratio (N1/N2) determines the step-down factor. For example, a 10,000V primary voltage with a 100:1 ratio yields 100V secondary output. Precision is critical, with phase angle errors kept below 1° for metering applications.

商家经验真实案例 · 安全可信
冷却塔填料作用
本文深入解析冷却塔填料的三大核心作用,包括增强热交换效率、优化水流分布和延长设备寿命,通过通俗易懂的比喻和工业场景实例,帮助读者全面理解这一关键部件的价值。

Key Features

Modern VTs prioritize accuracy (e.g., 0.1% for revenue metering) and thermal stability. Epoxy resin-cast units offer compactness for indoor use, while oil-immersed designs suit outdoor installations with better heat dissipation. Key specifications include rated voltage (e.g., 11kV, 33kV), burden capacity (in VA), and insulation class (e.g., IEC 60044-2). Capacitor VTs use a capacitive divider network for ultra-high voltages, reducing size and cost compared to electromagnetic types. Some models integrate anti-resonance features to prevent ferroresonance in ungrounded systems.

Application Areas

VTs are ubiquitous in substations, power plants, and industrial facilities. They feed voltage signals to protective relays for fault detection (e.g., over/under-voltage) and synchronize generators during grid connection. In smart grids, VTs with digital outputs (IEC 61850-9-2 LE) enable real-time monitoring via merging units. Specialized designs include optical VTs for EMI immunity and gas-insulated switchgear (GIS)-integrated models for space-constrained installations. Renewable energy systems also employ VTs for grid compliance testing.

Maintenance and Precautions

宽频电流互感器 高频传感器 中频互感器生产厂家德阳蜀高电力电子有限责任公司

Routine maintenance includes insulation resistance tests (megger tests) and visual inspections for oil leaks (in oil-filled VTs). Secondary circuits must never be open-circuited under load, as this can induce dangerous high voltages. For outdoor units, inspect bushings for pollution buildup and corrosion. Comply with local standards (e.g., ANSI/IEEE C57.13 for North America) for calibration intervals. Capacitor VTs require periodic capacitance and tan-delta measurements to detect dielectric degradation.

商家经验真实案例 · 安全可信
冷却塔填料检验指南
本文从材料特性、结构完整性和性能验证三个维度,系统介绍冷却塔填料的检验要点,帮助采购方建立科学的评估体系,确保选用的填料满足散热效率和使用寿命要求。

B2B Procurement Guide

When sourcing VTs, verify compliance with international standards (IEC/ANSI) and request type test reports for accuracy, temperature rise, and short-circuit withstand. For harsh environments, specify higher IP ratings (e.g., IP65 for dust/water resistance). Consider total cost of ownership: high-accuracy VTs (class 0.2) may cost 30–50% more than class 1.0 but reduce revenue losses in utility metering. Lead times vary; oil-immersed units typically require 8–12 weeks due to customized insulation design. Preferred suppliers include ABB, Siemens, and specialized manufacturers like Arteche or Ningbo Sanxing.

Related Manufacturers