Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

UV Traceable Grease

Updated: 2026-08-03

Overview

UV-tracing grease is a specialized lubricant formulated with fluorescent additives, enabling easy detection under ultraviolet (UV) light. This feature is particularly valuable in industrial settings where precise application and monitoring are critical. The grease combines the lubricating properties of conventional greases with the added benefit of traceability, making it ideal for maintenance, quality control, and leak detection. The fluorescent properties of UV-tracing grease allow technicians to identify lubricant application points, monitor distribution, and detect leaks or over-application. This ensures optimal performance of machinery while minimizing waste and environmental impact. The grease is typically non-toxic and compatible with a wide range of industrial materials, including metals, plastics, and elastomers.

Physical and Chemical Properties

高压抗磨液压油 46号 68 工程机械挖机泵车专用柴油 无灰工业润滑油江西巴格润滑科技有限公司

UV-tracing grease exhibits a semi-solid consistency, with a density ranging from 0.9 to 1.1 g/cm³. Under normal light, it often appears yellow or green, but it fluoresces brightly under UV light due to its specialized additives. The grease is insoluble in water but can dissolve in organic solvents, depending on its base oil composition. Thermal stability is a key characteristic, with melting points typically between 50°C and 100°C, depending on the base oil and thickener used. The grease maintains its lubricating properties across a broad temperature range, making it suitable for both high- and low-temperature applications. Its water resistance ensures reliable performance in humid or wet environments.

商家经验真实案例 · 安全可信
7.5高尔夫1.4机油用量
本文解析高尔夫7.5代1.4T车型的机油加注量,包括常规保养建议、不同工况下的机油消耗特点,以及如何通过油尺判断机油状态,帮助车主合理维护发动机。

Main Applications

UV-tracing grease is widely used in industrial maintenance to ensure precise lubrication of bearings, gears, and other moving parts. Its fluorescent properties allow technicians to verify proper application and identify areas that may require re-lubrication. This reduces the risk of under- or over-lubrication, which can lead to equipment failure. In leak detection, the grease is applied to seals and joints, and UV light is used to trace any leaks or breaches. It is also employed in quality control processes to inspect lubrication in assembled machinery. Automotive applications include lubricating components that require precise application, such as door hinges and electrical connectors.

Safety and Storage

拓牌3#特种锂基脂透明袋包装锂基润滑脂3号生产厂家批发工业黄油郑州拓牌润滑科技有限公司

While UV-tracing grease is generally non-toxic, it is advisable to avoid prolonged skin contact. Protective gloves and eye protection should be worn during handling to prevent irritation. In case of accidental ingestion or eye contact, seek medical advice and rinse thoroughly with water. Storage conditions are critical to maintaining the grease's properties. It should be kept in a cool, dry place, away from direct sunlight and moisture. Containers must be tightly sealed to prevent contamination and evaporation of volatile components. Proper storage ensures the grease remains effective for its intended shelf life, typically 1–2 years when stored correctly.

商家经验真实案例 · 安全可信
三和机油档次解析
本文从技术参数、适用场景和市场定位三个维度解析三和机油的档次,帮助用户了解其性能特点及适用性,为选购提供参考。

B2B Procurement Guide

When procuring UV-tracing grease, verify the UV traceability intensity and compatibility with your specific application. High-quality greases should fluoresce brightly under standard UV light (365 nm wavelength). Request technical datasheets and certifications from suppliers to ensure compliance with industry standards. Consider the base oil and thickener type, as these affect performance under different temperatures and loads. Lithium or polyurea thickeners are common choices. Pricing varies based on formulation and supplier, with bulk purchases often offering cost savings. Establish a reliable supply chain to avoid disruptions in maintenance schedules.

Related Manufacturers