Aicaigou LogoB2B WikiIndustrial Encyclopedia

UV Meter

Updated: 2026-08-20

Overview

UV radiometers are precision instruments designed to measure the intensity of ultraviolet radiation across specific wavelength bands (commonly UVA: 315–400 nm, UVB: 280–315 nm, or UVC: 100–280 nm). They serve critical roles in occupational safety, environmental monitoring, and industrial applications where UV exposure must be quantified. Modern devices often integrate digital displays, wireless connectivity, and compliance with international standards like ISO 17166 (CIE S 007/E) for erythemal weighting. High-end models may offer programmable alarms and spectral analysis for specialized research or manufacturing processes.

Structure and Working Principle

自循环一体机除尘效果明显 大工件不好收集焊烟青岛路博宏业环保技术开发有限公司

A typical UV radiometer consists of three core components: a photodetector (usually a filtered silicon photodiode or thermopile), signal conditioning circuitry, and a display/interface unit. The sensor converts UV photons into electrical signals proportional to irradiance (W/m² or μW/cm²). Advanced units incorporate optical diffusers to ensure cosine-corrected angular response, critical for accurate measurements under varying light angles. Some industrial variants feature ruggedized housings with IP65/IP67 ratings for use in harsh environments like wastewater treatment plants or semiconductor fabrication facilities.

商家经验真实案例 · 安全可信
峰流速仪使用指南
本文详细介绍峰流速仪的正确使用方法,包括操作步骤、注意事项以及结果解读,帮助用户准确监测呼吸道健康状况。

Key Features

Spectral selectivity is paramount—high-quality radiometers use interference filters to isolate target UV bands while rejecting visible/IR interference. For example, solar UV monitors typically focus on UVB+UVA ranges with erythemal weighting functions. Additional features may include temperature compensation (to minimize drift), auto-ranging scales (from μW/cm² to mW/cm²), and compliance with industry-specific standards such as FDA guidelines for tanning equipment or ICNIRP limits for occupational exposure.

Application Areas

In industrial settings, UV radiometers monitor curing processes in printing/painting (where 300–400 nm UV lamps polymerize coatings) or validate disinfection systems (UVC at 254 nm for germicidal applications). Environmental scientists use them to track ozone layer effects on terrestrial UV levels. The healthcare sector relies on these devices to calibrate phototherapy equipment for psoriasis treatment (narrowband UVB at 311 nm) or verify sterilization lamp outputs. Outdoor workplaces (construction, agriculture) deploy handheld models for real-time worker exposure assessment against NIOSH/ACGIH threshold limit values (TLVs).

Maintenance and Precautions

MHJ-98A微电脑在线微波泄漏检测仪 适用于微波泄漏测量天津恒祥泰科技有限公司

Regular calibration (annually or per manufacturer guidelines) against NIST-traceable standards is essential—some professional models allow user calibration with reference sources. Store sensors in protective cases when not in use to prevent filter degradation from dust/humidity. Avoid prolonged exposure to intensities beyond the device's maximum range, which may saturate the detector. For UVC measurements, ensure the instrument is rated for short-wavelength UV as many consumer-grade meters lack adequate sensitivity below 250 nm.

商家经验真实案例 · 安全可信
精准污水采样仪
本文介绍精准污水采样仪的工作原理、应用场景及其技术优势,帮助读者了解这一设备如何提升污水监测的准确性和效率。

B2B Procurement Guide

Industrial buyers should specify required spectral ranges (e.g., UV-A+B for outdoor monitoring vs. selective UVC for germicidal verification). Consider whether spot measurements suffice or if continuous logging with PC software integration is needed. For batch purchasing, verify minimum order quantities (MOQs) and lead times—some OEM manufacturers offer customization of measurement ranges or form factors. Budget approximately 20–30% extra for calibration certificates and maintenance kits when procuring high-accuracy laboratory-grade instruments.

Related Manufacturers