Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

UCC28C44 Current-Mode PWM Controller

Updated: 2026-08-10

Overview

The UCC28C44 is a current-mode pulse-width modulation (PWM) controller designed for efficient power management in electronic systems. Developed by Texas Instruments, it is widely used in switch-mode power supplies (SMPS), AC/DC converters, and other applications requiring precise voltage regulation. Its compact design and high reliability make it a preferred choice for industrial and consumer electronics. The controller operates at a fixed frequency and integrates critical protection features such as overvoltage and overcurrent safeguards. Its low standby power consumption enhances energy efficiency, aligning with modern sustainability standards.

Structure and Working Principle

UCC28C44DR 开关电源芯片 TI德州仪器 封装SOP8 批号25+深圳市向阳芯城科技有限公司

The UCC28C44 consists of an error amplifier, oscillator, PWM comparator, and output driver. The error amplifier compares the feedback voltage with a reference to adjust the PWM duty cycle, ensuring stable output. The oscillator generates a fixed-frequency signal, while the PWM comparator modulates the pulse width based on current feedback. In operation, the controller monitors the output current via a sensing resistor. If the current exceeds a set threshold, the PWM duty cycle is reduced to prevent damage. This current-mode control provides faster response to load changes compared to voltage-mode controllers.

商家经验真实案例 · 安全可信
温度控制选单片机还是PLC
本文对比分析单片机与PLC在温度控制系统中的应用差异,从成本、复杂度、稳定性三个维度给出选择建议,帮助工程师根据项目需求做出合理决策。

Key Features

The UCC28C44 offers several standout features, including a wide input voltage range (up to 30V) and adjustable switching frequency (up to 1MHz). Its built-in under-voltage lockout (UVLO) ensures safe startup, while thermal shutdown protects against overheating. Additionally, the controller supports synchronous rectification, improving efficiency in DC/DC converters. Its low startup current (typically 0.5mA) minimizes power loss during initialization, making it suitable for battery-powered devices.

Application Areas

This PWM controller is commonly used in power adapters, LED drivers, and telecom power systems. Its robustness and precision also make it ideal for automotive electronics, where reliability is critical. In industrial settings, the UCC28C44 is deployed in motor control circuits and uninterruptible power supplies (UPS). Its versatility extends to renewable energy systems, such as solar inverters, where stable voltage regulation is essential.

Maintenance and Precautions

UCC28C44DR SOP8封装 TI开关电源芯片 5850数量 批号21+深圳市春林微电子科技有限公司

To ensure longevity, avoid exposing the UCC28C44 to voltages beyond its rated limits. Proper PCB layout is crucial to minimize noise and heat buildup. Use thermal vias and heatsinks if operating in high-temperature environments. Regularly inspect solder joints and connections for wear. Follow ESD precautions during handling to prevent static damage. Refer to the manufacturer's datasheet for detailed thermal and electrical guidelines.

商家经验真实案例 · 安全可信
太阳传感器工作原理
本文生动解析太阳传感器如何通过光电效应或热效应感知阳光,介绍其核心元件(如光敏电阻、热电堆)的工作机制,并探讨不同环境下的应用特点,帮助读者理解这一常见但精巧的探测技术。

B2B Procurement Guide

When procuring the UCC28C44, verify authenticity by purchasing from authorized distributors like Texas Instruments or reputable suppliers. Bulk orders typically qualify for discounts, with prices ranging from $0.50 to $2.00 per unit depending on quantity. Check for compliance with industry standards such as RoHS and REACH. Lead times vary; plan orders in advance during peak demand periods. Evaluate alternative models (e.g., UCC28C43) for cost or performance trade-offs if needed.

Related Manufacturers