Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TXB0104

Updated: 2026-08-06

Overview

The TXB0104 is a popular bidirectional voltage-level translator integrated circuit that enables seamless communication between devices operating at different voltage levels. Developed using CMOS technology, it features automatic direction sensing, eliminating the need for a separate direction control signal. This translator is particularly useful in modern electronic systems where multiple voltage domains coexist, such as in mixed-voltage system designs. Its compact form factor and robust performance make it a preferred choice for engineers across various industries.

Structure and Working Principle

TXB0104QRGYRQ1 转换器,电平移位器 TI 封装14-VFQFN  批次24+深圳市新思汇科技有限公司

The TXB0104 consists of four bidirectional channels, each capable of automatic direction detection. The device uses a pass-gate architecture with integrated edge-rate accelerators to ensure fast signal transmission while maintaining signal integrity. When a signal is applied to either side (A or B ports), the internal circuitry automatically detects the direction of data flow and provides the appropriate voltage translation. The device supports voltage translation between any two levels within its specified range (typically 1.2V to 3.6V on either side).

商家经验真实案例 · 安全可信
逆变器内置有电池吗
本文解析逆变器是否内置电池的常见疑问,区分纯逆变与储能逆变器的核心差异,并给出设备选型时的实用建议,帮助用户根据需求选择合适类型。

Key Features

The TXB0104 offers several notable features including fully automatic direction sensing, which simplifies system design by eliminating the need for direction control signals. It provides bidirectional voltage translation with no power-supply sequencing requirements. Other important features include 1.2V to 3.6V operation on all ports, support for partial-power-down mode, and typical data rates of up to 100 Mbps. The device is also available in various package options, including small-outline packages for space-constrained applications.

Application Areas

This voltage-level translator finds widespread use in industrial automation systems where different voltage domains need to communicate, such as between sensors, controllers, and actuators. It's also commonly employed in consumer electronics for interfacing between processors, memories, and peripherals. Additional applications include communication systems (RS-232, I2C, SPI interfaces), automotive electronics, and portable battery-powered devices. The TXB0104 is particularly valuable in designs requiring bidirectional communication between components with different operating voltages.

Maintenance and Precautions

TXB0104QPWRQ1 转换器,电平移位器 TI 封装TSSOP 批次21+雅创芯城(深圳)供应链有限公司

When implementing the TXB0104, ensure that the voltage levels on either side of the translator remain within the specified operating range. Proper decoupling capacitors should be placed near the power supply pins to maintain stable operation. Avoid exposing the device to voltages beyond its absolute maximum ratings, as this may cause permanent damage. For optimal performance in high-speed applications, pay attention to PCB layout guidelines, including proper trace routing and impedance matching where necessary.

商家经验真实案例 · 安全可信
继电器红灯亮起怎么办
本文解析小型中间电磁继电器亮红灯的常见原因及处理方法,并介绍判断继电器工作状态的实用技巧,帮助快速定位问题并确保设备正常运行。

B2B Procurement Guide

When procuring TXB0104 translators in bulk, consider the specific package type (e.g., SOIC, TSSOP) required for your application. Verify the operating temperature range needed for your environment, as different variants are available. For reliable supply, establish relationships with authorized distributors or directly with the manufacturer. Request samples for testing before large purchases, and consider lead times when planning production schedules. Pricing typically decreases with larger order quantities.

Related Manufacturers