Aicaigou LogoB2B WikiIndustrial Encyclopedia

TXB0101DCKR

Updated: 2026-08-20

Overview

The TXB0101DCKR is a bidirectional voltage-level translator integrated circuit (IC) developed by Texas Instruments. It is designed to facilitate seamless communication between devices operating at different logic voltage levels, such as 1.2V, 1.8V, 2.5V, 3.3V, and 5V. The device is particularly useful in mixed-voltage systems where components with varying voltage requirements need to interface without additional level-shifting circuitry. The TXB0101DCKR is housed in a small SC70-6 package, making it suitable for space-constrained applications. Its automatic direction sensing feature simplifies design by eliminating the need for a direction control signal, reducing system complexity and component count.

Structure and Working Principle

TXB0101DCKR 电平移位器 SC70-6封装 宽温工作 稳定可靠深圳市齐森电子有限公司

The TXB0101DCKR consists of a single-channel bidirectional voltage-level translator with built-in pass-gate circuitry. The device detects the direction of data flow automatically, allowing it to translate signals bidirectionally without external intervention. When a signal is applied to one side (A or B), the internal circuitry detects the voltage level and translates it to the corresponding level on the other side. The translator operates by using a series of MOSFETs and level-shifting circuitry to ensure accurate and efficient voltage translation. The device is designed to handle a wide range of voltage levels, making it versatile for various applications. The absence of a direction control pin simplifies the design and reduces the need for additional logic components.

商家经验真实案例 · 安全可信
opopa2参数详解
本文全面解析opopa2的关键参数配置,包括其核心功能特性、适用场景及性能表现,帮助用户快速掌握设备的技术要点与实用价值。

Key Features

One of the standout features of the TXB0101DCKR is its automatic direction sensing, which eliminates the need for a direction control signal. This feature reduces design complexity and saves board space. The device supports voltage translation between 1.2V and 5V, making it suitable for a wide range of applications. Other notable features include low propagation delay, high noise immunity, and minimal power consumption. The TXB0101DCKR is also designed to handle high-speed signals, making it ideal for applications requiring fast data transfer. Its small form factor (SC70-6 package) is advantageous for compact designs.

Application Areas

The TXB0101DCKR is widely used in mixed-voltage systems, such as interfacing between microcontrollers, sensors, and peripheral devices operating at different logic levels. Common applications include consumer electronics (e.g., smartphones, tablets), industrial automation (e.g., PLCs, sensors), and communication systems (e.g., UART, I2C interfaces). In consumer electronics, the device is often used to interface low-voltage processors with higher-voltage peripherals. In industrial settings, it facilitates communication between sensors and control units with varying voltage requirements. The TXB0101DCKR is also employed in automotive electronics, where reliable voltage translation is critical for system performance.

Maintenance and Precautions

TXB0101DCKR 转换器,电平移位器 TI 封装N/A 批次2024+深圳市科美奇科技有限公司

To ensure optimal performance and longevity of the TXB0101DCKR, it is important to adhere to recommended operating conditions. Avoid exceeding the maximum voltage ratings, as this can damage the device. Proper decoupling capacitors should be used near the power pins to minimize noise and ensure stable operation. When designing the PCB, ensure proper trace routing to minimize signal integrity issues. Thermal considerations are generally minimal due to the device's low power consumption, but adequate ventilation should still be maintained in high-density layouts. Always refer to the manufacturer's datasheet for detailed specifications and guidelines.

商家经验真实案例 · 安全可信
导热贴性能如何
本文解析导热贴的关键性能特点,包括其导热效率、适用场景及使用注意事项,帮助读者全面了解导热贴的实际应用效果。

B2B Procurement Guide

When procuring the TXB0101DCKR in bulk, it is advisable to source from authorized distributors or directly from the manufacturer to ensure authenticity and quality. Pricing varies based on order quantity, with discounts typically available for larger purchases. Lead times can vary, so it is important to plan ahead and confirm availability with suppliers. Key considerations include verifying the device's compatibility with the target application's voltage levels and speed requirements. It is also recommended to request samples for testing before committing to large orders. For long-term projects, establishing a relationship with a reliable supplier can ensure consistent supply and support.

Related Manufacturers