Overview
Two-component soft touch paint is a polyurethane-based coating system comprising a resin (Part A) and a hardener (Part B). When mixed, these components undergo a chemical reaction to form a durable, velvety matte surface. The technology originated in automotive interiors but has expanded to high-end consumer goods due to its premium tactile and visual qualities. Unlike conventional paints, soft touch formulations incorporate elastic modifiers and matting agents to achieve their signature texture. They are particularly favored for products requiring frequent human contact, such as steering wheels, laptop lids, or cosmetic packaging.
Physical and Chemical Properties
The paint’s low-gloss finish (typically 3-10 GU at 60°) results from embedded silica or wax additives that scatter light. Its elasticity (elongation at break: 80-150%) prevents cracking under deformation, while cross-linked polyurethane networks provide hardness ratings of 1-2H (pencil scale). Chemically, cured films resist oils, mild acids (pH 4-9), and alcohols. However, prolonged UV exposure may cause slight yellowing unless stabilized with hindered amine light stabilizers (HALS). The uncured mixture has a pot life of 2-6 hours at 25°C, depending on the hardener type.
Main Applications
1. **Furniture**: Used on cabinet handles, table edges, and premium office fixtures for a warm, scratch-resistant surface. 2. **Automotive**: Applied to dashboard panels, gear knobs, and door trims to reduce glare and enhance grip. 3. **Electronics**: Coats headphones, game controllers, and wearable devices for ergonomic comfort. Niche uses include medical equipment housings (easy-to-clean surface) and retail display units (fingerprint resistance). In B2B settings, manufacturers often request custom colors matched to Pantone or RAL standards.
Safety and Storage
Uncured Part A may contain hydroxyl-functional polyols, while Part B typically includes aliphatic isocyanates (e.g., HDI trimer). Always mix in ventilated areas with explosion-proof equipment due to solvent vapors (commonly ethyl acetate or PMA). Store components separately below 30°C to prevent premature curing. Shelf life is typically 12 months in unopened containers. Dispose of waste per local regulations for isocyanate-containing materials. MSDS must specify first-aid measures for skin/eye contact.
B2B Procurement Guide
Key specifications to request: 1. **Cure schedule** (e.g., 30 mins @ 80°C vs. 7 days @ 23°C). 2. **Adhesion** (ASTM D3359 cross-hatch rating ≥4B). 3. **Abrasion resistance** (Taber test cycles to failure). For large orders, inquire about bulk discounts (common for 200+ kg shipments). Asian suppliers may offer lower costs ($15-$30/kg), but verify REACH/EPA compliance. Always test batches for texture consistency using tactile spectrometers or human panel evaluations.
Related Manufacturers
- 主营：[]
- 主营：滚涂机、淋涂机、往复喷漆机、辊涂机、膜压机、uv滚涂机、喷涂机
- 主营：uv漆、地板漆、地板水性漆、UV肤感漆厂家、水性色浆染料、油性色浆染料、木地板油漆
- 主营：重防腐涂料、氟碳漆、特种涂料、聚氨酯面漆、丙烯酸聚氨酯涂料、脂肪族聚氨酯涂料、氯化橡胶漆、氯磺化聚乙烯漆、环氧富锌底漆、环氧铁红底漆、水性聚氨酯涂料、水性丙烯酸漆
- 主营：树脂
- 主营：红胡桃、免漆板、胡桃楸木、uv面漆板、面漆板定制、科技木皮、黑胡桃木、实木家具、门封边条、胶封边条、楸木家具、黄花梨花纹、红橡封边条、樱桃封边条、黑胡桃家具、花纹封边条、水曲柳实木、黑胡桃直纹、白橡直花纹、兔宝宝木皮、科技木贴皮、直纹花梨木、木皮封边条、樱桃木封边条、花梨直纹木皮
- 主营：化工产品、树脂、表面活性剂、适用于木器全哑面漆、乳化剂、消泡剂、硅油、柔软剂、固化剂、抗静电剂、脱膜剂、起泡剂、水性材料、种子包衣、化妆品级原料、油包水乳化剂、水包油乳化剂、异构十二烷、金属脱膜剂、水性硬脂酸锌、塑料抗静电剂、环氧树脂固化剂、棉麻柔软剂、甲基硅油、水溶性硅油、CAB系列起泡剂
- 主营：水性树脂、水性丙烯酸、水性聚氨酯、肤感树脂、水性自消光树脂、水性UV树脂、水性哑光树脂