Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Two-component JS Polymer Waterproof Coating

Updated: 2026-07-21

Overview

JS Polymer Waterproof Coating is a two-component system combining a polymer emulsion (liquid) and cementitious powder. Upon mixing, it forms a flexible, durable waterproof membrane. Developed as an eco-friendly alternative to traditional asphalt coatings, it is widely adopted in modern construction for its superior performance and ease of application. The name 'JS' derives from its composition: 'J' for polymer (e.g., acrylic or VAE emulsion) and 'S' for cement (in Chinese: 聚合物-水泥). It bridges the gap between rigid cementitious coatings and elastic polymer membranes, offering both structural adhesion and crack-bridging capabilities.

Physical and Chemical Properties

JS聚合物水泥防水涂料卫生间水池游泳池高分子双组分耐水泡广东中友力科技有限公司

The liquid component (emulsion) typically contains acrylic or vinyl acetate-ethylene (VAE) copolymers, providing elasticity and water resistance. The powder comprises Portland cement, quartz sand, and additives. When mixed, the polymer forms a film around cement hydrates, creating a composite structure. Key properties include elongation at break (≥150%), tensile strength (≥1.8 MPa), and impermeability (≥0.3 MPa pressure resistance). The cured coating is alkali-resistant and withstands temperatures from -20°C to 80°C. It adheres well to concrete, mortar, and brick surfaces without priming.

商家经验真实案例 · 安全可信
防水施工安全要点
本文从个人防护、环境管理和操作规范三个维度,系统介绍防水工程中的安全实践,帮助施工人员规避常见风险,确保作业安全高效。

Main Applications

JS coatings are primarily used in wet or water-exposed areas. Common applications include basement walls/floors, bathroom wet rooms, balconies, and roof terraces. They are also specified for water-retaining structures like swimming pools and sewage tanks due to their non-toxic nature after curing. In civil engineering, JS coatings protect tunnels, bridges, and underground structures from water ingress. Their flexibility makes them suitable for dynamic joints and cracks. Some formulations are tailored for exterior wall insulation systems or as a base layer for tile adhesives.

Safety and Storage

JS 聚合物水泥基防水涂料 住宅建筑双组分防水材料 加工生产厂家潍坊德象防水材料有限公司

The emulsion component is water-based and low-VOC, posing minimal health risks during application. However, the powder may generate dust; respiratory protection is advised when mixing. Cured coatings are food-contact safe and odorless. Storage requires separating liquid and powder components. The emulsion must be kept above 5°C to prevent freezing, while the powder should be stored in moisture-proof packaging. Shelf life is typically 6–12 months for the emulsion and 12 months for the powder under proper conditions.

商家经验真实案例 · 安全可信
阳台防水刷多高合适
本文解答阳台防水涂刷高度的合理范围,分析不同场景下的施工要点,并提供延长防水层寿命的实用建议,帮助读者科学规划防水工程。

B2B Procurement Guide

When sourcing JS coatings, prioritize suppliers with ISO 9001 certification and compliance with Chinese national standards (e.g., GB/T 23445 for Type I/II/III classifications). Request batch test reports for tensile strength, elongation, and impermeability. Bulk buyers should negotiate pricing based on volume (e.g., 20kg pails or 200kg drums). Consider logistics: emulsion components may require temperature-controlled transport. For large projects, opt for manufacturers offering on-site technical support to ensure proper mixing and application.

Related Manufacturers