Tungsten-Lanthanum Alloy Rod[2]
Overview
Tungsten lanthanum (W-La) alloy rod is a sophisticated refractory metal product combining tungsten's exceptional high-temperature properties with lanthanum's beneficial effects on thermionic emission and microstructure stability. This alloy typically contains 1-2% lanthanum oxide (La2O3) dispersed within the tungsten matrix, significantly improving high-temperature creep resistance and recrystallization behavior compared to pure tungsten. The material is produced through powder metallurgy techniques involving pressing, sintering, and swaging processes. These rods are manufactured in diameters ranging from 0.5mm to 50mm, with surface finishes varying from as-sintered to polished or ground surfaces depending on application requirements. The controlled addition of lanthanum creates a doped microstructure that enhances performance in demanding thermal environments while maintaining excellent electrical conductivity.
Physical and Chemical Properties
Tungsten lanthanum alloy exhibits remarkable physical properties including a density nearly matching pure tungsten (~19.3 g/cm³), with typical Vickers hardness of 350-450 HV in the worked condition. The material maintains dimensional stability up to 90% of its melting point, with a thermal expansion coefficient of 4.5×10⁻⁶/K (25-1000°C) and thermal conductivity around 170 W/(m·K) at room temperature. The lanthanum doping increases the work function to approximately 2.7-2.9 eV, significantly improving electron emission characteristics. Chemically, the alloy demonstrates excellent corrosion resistance to molten metals and many acids, though it can oxidize in air above 500°C necessitating protective atmospheres for high-temperature applications. The distributed lanthanum oxide particles inhibit grain growth at elevated temperatures, preserving mechanical strength. Electrical resistivity is approximately 5.5 μΩ·cm at 20°C, making it suitable for various electrical applications.
Main Applications
The primary application of tungsten lanthanum alloy rods is in high-temperature electron emission devices, particularly cathodes for plasma welding and cutting torches where they demonstrate superior arc stability and service life compared to thorium-doped alternatives. In the semiconductor industry, these rods serve as critical components in ion implantation equipment and as evaporation sources in physical vapor deposition systems. Additional applications include thermocouple sheaths for extreme temperature measurements (up to 2300°C), heating elements for vacuum furnaces, and structural components in aerospace propulsion systems. The medical field utilizes these rods in radiation shielding and radiotherapy equipment. Emerging applications include electrodes for superconducting magnet systems and components in nuclear fusion research devices.
Safety and Storage
While tungsten lanthanum alloy rods are generally stable under normal conditions, appropriate safety measures should be taken during handling and processing. Machining operations may generate fine metallic dust requiring proper ventilation and respiratory protection (NIOSH-approved N95 respirator minimum). The material presents minimal toxicity risk unless finely divided and inhaled—adequate dust control measures are essential during grinding or cutting operations. Storage should be in dry, climate-controlled environments to prevent surface oxidation. For long-term storage, vacuum-sealed packaging with desiccants is recommended. Fire hazards are minimal due to the material's high ignition temperature, but standard Class D extinguishers should be available when processing. Secondary containment is advised for bulk storage to contain potential powder spills.
B2B Procurement Guide
When procuring tungsten lanthanum alloy rods, specification clarity is paramount. Key parameters include diameter tolerance (typically ±0.01mm to ±0.1mm), straightness (often <0.1mm per 100mm length), surface finish (Ra 0.8μm to 3.2μm), and lanthanum oxide content (usually 1.0-2.0%). Certifications should include material test reports verifying chemical composition, density (>98.5% theoretical), and microstructure characteristics. Lead times for specialty sizes can extend 8-12 weeks, so advanced planning is recommended. Benchmark pricing should account for diameter—smaller diameters (under 3mm) typically command 20-30% premium over standard 6-10mm rods. Reliable suppliers will provide documentation confirming compliance with relevant standards (ASTM B777, AMS5798, or equivalent). Consider negotiating volume discounts for orders exceeding 50kg, with tiered pricing available for some commercial purity grades.
Related Manufacturers
- 主营:热处理工装料架、真空炉组件、玻璃窑炉钼电极、高纯钨钼、钨镍铁 钨镍铜、钨钼锆钛坩埚、钨钼电极棒、钨钼流口、钨钼钽铌锆钛各类加工件、钨丝钼丝、TZM合金、钨网发热体、钼镧合金管、镧钨合金、钼顶头、钼加热带隔热屏、热电偶保护管、钼加热丝
- 主营:钼零件、钼坩埚定制、高温钼连接件、钨配件、钨异形件、机加工钨坩埚、半导体钨零件、钨离子注入件、钨钢、钨镍铁、钨镍铜、高比重钨合金、钼棒、钨板、钨片、钨屏蔽件、钼离子注入件、钼箔、钼加工件、工业炉钼制品、钼托、钼板、钼片、钼圆片、钽加工件
- 主营:钼板、钼深加工件、离子注入配件、钨板、钨棒、钼棒、钨深加工件、钽棒、钨加工件、钨配件、钨靶、钨螺丝、钨定制件、钼加工件、钽加工件、钼配件、钽配件、钽接地环、钼螺丝、钼圆、钼靶、钽靶、钽螺丝、钼异形件、钼定制件
- 主营:钽铌加工件、铪金属制品、铱金属制品、钨钼加工件、铜镶钨电极、合金加工件、铍金属制品、电极加工件、稀有金属制品、贵金属加工件
- 主营:钼合金棒、镜面钼片、99.95%高纯度钼板
- 主营:钼坩埚、钼板、钼块、钼棒、钨片、钨棒、钨电极、钨丝绳、钨丝、钨管、钨舟、TZM合金棒、TZM合金板、钼镧合金、钨铜合金、钨钼合金、钼钛锆合金、钼电极、钼丝、钼杆、钼管、钼舟、钼垫片、钼顶头、钼靶材
- 主营:铍铜、铍钴铜、稀土铜、合金铜、钨铜、铜棒、钨铜合金、铜铁合金、钨铜合金棒、钨铜合金薄板、钨铜棒材、磨光钨棒、钨丝、合金钨铜、碰焊铬锆铜棒、钨铜棒、钨铜板、铬锆铜、氧化铝铜、镍铬硅铜、NBC铜、高铍铜、铍钴镍铜、电极帽、铜板
- 主营:耐热钢、耐热刚铸造件
- 主营:新能源汽车专用材料、走心机专用材、高精密焊接材料、7075铝棒、agw70银钨、钨铜合金、航空航天配件用材料、五金配件用材料、船舶专用铝板
- 主营:模具钢、球墨铸铁 灰铁、铅黄铜、铜中间合金、合金钢、铜合金、铝中间合金、镁中间合金、镍基合金、高温合金、锡铋合金、易容合金、镁合金、钛合金、巴氏合金、铅基合金、镍镁合金、1.8519合金钢、276哈氏合金、不锈钢、3D打印粉末、锡青铜、铝青铜、碳素钢
- 主营:钼坩埚、钼丝、钼舟、钨坩埚、钨棒、钨丝、钨丝绳、钨片、钼棒、钨电极、钼镧合金、钨钼合金、钨管、钨靶材、钼板、钼管、钼导流筒、TZM钼、钼圆、钼片、钼电极、钼靶材
- 主营:引出线、钼坩埚、钼顶头、钨坩埚、钨顶头、钨流口、钨钼加工件、钼工装料架、钽铌钒锆铪
- 主营:司太立、钴铬钼、金属镓、钨合金、钼合金、高温合金、高比重合金、钨镍铁、钨镍铜、TC4钛合金、ta2纯钛棒、AZ31镁合金、镁合金az91d、镍钛合金、银钨合金、钨铜合金、镓铟锡合金、镍基合金、TZM钼合金、巴氏合金、可伐合金、铝中间合金、低熔点合金、钨铼丝、稀有金属
- 主营:钨合金球、钨加热子、高纯度钨板、碱洗面磨光钨板、热电保护管
- 主营:钨制品、纯钨钨环、金属合金、离子注入钨件、钨合金加工件、钨钼合计、钼制品
