Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS70302PWP

Updated: 2026-07-15

Overview

The TPS70302PWP is a dual-output, low-dropout (LDO) voltage regulator manufactured by Texas Instruments. It is designed to provide precise and stable power supplies for sensitive electronic components such as microprocessors, FPGAs, and DSPs. The device integrates two independent regulators in a single package, reducing board space and simplifying power management designs. Its compact HTSSOP-20 PowerPAD package enhances thermal performance, making it suitable for high-density applications. The TPS70302PWP is widely used in industrial automation, telecommunications, and consumer electronics due to its reliability and efficiency.

Structure and Working Principle

TPS70302PWP 电源管理芯片 刚到现货,原厂原封 时钟频率深圳市深创盛科技有限公司

The TPS70302PWP consists of two linear voltage regulators with shared input but independent outputs. Each regulator includes a reference voltage source, error amplifier, and pass transistor. The device operates by comparing the output voltage to an internal reference, adjusting the pass transistor to maintain a stable output despite input or load variations. Thermal shutdown and current-limiting circuits protect the device from overheating and overcurrent conditions. The power-good (PG) pins provide status signals for each output, enabling system monitoring and fault detection. This dual-regulator architecture ensures minimal cross-regulation interference between outputs.

商家经验真实案例 · 安全可信
mp99芯片参数解析
本文全面解析mp99系列芯片的关键参数,包括基础型号mp99、音频解码专用型号mp9911714及衍生型号mpmp991/mpmp99的性能特点与核心功能,帮助读者快速掌握该系列芯片的技术特性。

Key Features

The TPS70302PWP offers a low dropout voltage (typically 300 mV at 1 A), ensuring efficient operation even with small input-output differentials. Its high accuracy (±2% over temperature and load) makes it suitable for precision applications. The device supports adjustable or fixed output voltages, with options ranging from 1.2 V to 5.5 V. Additional features include thermal shutdown protection, which disables the regulator if junction temperature exceeds safe limits, and power-good indicators for each output. The HTSSOP-20 package with an exposed thermal pad ensures effective heat dissipation, critical for high-current applications.

Application Areas

The TPS70302PWP is commonly used in systems requiring dual-voltage supplies, such as industrial control systems, networking equipment, and medical devices. Its precision and reliability make it ideal for powering FPGAs, DSPs, and microcontrollers, where voltage stability is critical. In consumer electronics, it is employed in set-top boxes, gaming consoles, and portable devices. The regulator’s low noise output also suits RF and analog circuits. Its robustness and compact design cater to space-constrained applications, such as IoT modules and embedded systems.

Maintenance and Precautions

TPS70302PWP 电源管理芯片 TI/德州仪器 封装TSSOP-24 批次23+深圳市汇莱威科技有限公司

To ensure longevity, avoid exposing the TPS70302PWP to input voltages exceeding its rated maximum (6.5 V) or load currents beyond specified limits. Proper PCB layout is essential—place decoupling capacitors close to the input and output pins to minimize noise and instability. Thermal management is critical; use the PowerPAD for heat dissipation and ensure adequate airflow in high-temperature environments. Regularly inspect solder joints and connections for signs of wear or corrosion, especially in industrial settings. Follow ESD precautions during handling to prevent damage to sensitive components.

商家经验真实案例 · 安全可信
温感器电阻为0原因
本文解析温感器电阻归零的三种典型情况:短路故障、传感器老化失效及极端环境影响,并提供对应的排查思路,帮助快速定位问题源头。

B2B Procurement Guide

When procuring the TPS70302PWP, verify the required output voltage configuration (fixed or adjustable) and current capacity. Purchase from authorized distributors like Texas Instruments or reputable electronics suppliers to avoid counterfeit products. Bulk orders typically reduce unit costs; negotiate pricing for quantities above 1,000 units. Check lead times, as supply chain disruptions may affect availability. Request samples to validate performance in your application before large-scale procurement. Review datasheets for revision updates or alternative part numbers (e.g., TPS70302PWPR for tape-and-reel packaging).

Related Manufacturers