Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS62742DSSR

Updated: 2026-07-25

Overview

The TPS62742DSSR is a highly efficient step-down DC-DC converter IC developed by Texas Instruments. Designed specifically for battery-powered applications, this component excels in scenarios where power conservation is critical. Its ultra-low quiescent current makes it particularly suitable for always-on devices that require long battery life. The device comes in a compact WSON package (2mm x 2mm), making it ideal for space-constrained designs. It supports input voltages from 2.2V to 6V and provides output voltages as low as 1.2V, with output currents up to 300mA. The TPS62742DSSR incorporates advanced features like automatic PFM/PWM mode switching to optimize efficiency across different load conditions.

Structure and Working Principle

TPS62742DSSR 电源芯片 TI德州仪器 封装WSON12 批号25+深圳市中芯巨能电子有限公司

The TPS62742DSSR integrates a synchronous buck converter topology with power switches, control logic, and protection circuits on a single silicon die. The device operates by rapidly switching the input voltage through an internal inductor, then filtering and regulating the output to the desired voltage level. A key aspect of its operation is the automatic transition between pulse-frequency modulation (PFM) at light loads and pulse-width modulation (PWM) at heavier loads. This dual-mode approach maximizes efficiency across the entire load range, from microamps to the full 300mA output capability. The IC also features a power-save mode that reduces switching frequency at light loads to minimize quiescent current.

商家经验真实案例 · 安全可信
赛艇s250与叉max300区别
本文从动力性能、配置细节和骑行体验三个维度,对比分析光阳赛艇s250与雅马哈叉max300的核心差异,帮助读者根据需求选择更适合的车型。

Key Features

The TPS62742DSSR stands out for its exceptional power efficiency, with typical conversion efficiency exceeding 90% across much of its operating range. Its quiescent current is remarkably low, typically just 350nA in power-save mode, which is crucial for battery longevity in always-on applications. Other notable features include 100% duty cycle capability (when input voltage approaches output voltage), soft-start to prevent inrush current, and thermal shutdown protection. The device also offers excellent line and load regulation, maintaining stable output despite variations in input voltage or load current.

Application Areas

This converter is particularly well-suited for energy-harvesting systems and wireless sensor nodes that need to operate for years on small batteries or alternative power sources. Its combination of high efficiency and small footprint makes it ideal for wearable electronics, medical patches, and other portable health monitoring devices. In industrial settings, the TPS62742DSSR finds use in IoT endpoints, smart meters, and environmental sensors. Consumer applications include smart watches, fitness trackers, and electronic shelf labels. The device's ability to maintain regulation with very low input voltages also makes it suitable for single-cell battery applications.

Maintenance and Precautions

TPS62742DSSR 电源管理芯片 TI/德州仪器 封装WSON-12 批次2010+雅创芯城(深圳)供应链有限公司

While the TPS62742DSSR is a robust component, proper PCB layout is critical for optimal performance. Designers should pay special attention to the placement of input and output capacitors close to the IC, use adequate ground planes, and minimize trace lengths for the switching nodes. Thermal management is generally not a concern for typical low-power applications, but for continuous operation near maximum load, thermal vias under the device's thermal pad are recommended. Input voltage should never exceed the absolute maximum rating of 7V, and reverse polarity protection should be considered if the input source might be connected incorrectly.

商家经验真实案例 · 安全可信
西屋s180和荣泰rt80区别
本文从核心功能、设计特点和使用体验三个维度对比西屋s180与荣泰rt80的差异,帮助读者根据实际需求做出合理选择。

B2B Procurement Guide

When sourcing the TPS62742DSSR, buyers should verify they're receiving genuine Texas Instruments parts, preferably through authorized distributors. Lead times can vary, so checking stock availability across multiple suppliers is advisable for time-sensitive projects. Consider ordering evaluation modules (EVMs) for prototyping before committing to large quantities. For high-volume purchases (typically 1,000+ units), direct engagement with Texas Instruments or their major distributors may yield better pricing. Note that alternative packaging options (tape and reel vs. cut tape) may affect pricing and minimum order quantities.

Related Manufacturers