Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS60400DBVT

Updated: 2026-08-02

Overview

The TPS60400DBVT is a charge pump voltage inverter integrated circuit (IC) manufactured by Texas Instruments. It belongs to a family of devices designed to provide simple and efficient voltage inversion for low-power electronic systems. The device operates by converting a positive input voltage (typically +1.8V to +5.5V) to a corresponding negative output voltage with high efficiency. As a charge pump, the TPS60400DBVT doesn't require inductors, making it particularly suitable for space-constrained applications. Its compact SOT-23 package and minimal external component requirements (just two flying capacitors) make it a popular choice for portable electronics, instrumentation, and other battery-powered systems where board space is at a premium.

Structure and Working Principle

TPS60400DBVT 电源管理芯片 TI/德州仪器 封装SOT23-5 批次23+深圳市汇莱威科技有限公司

The TPS60400DBVT utilizes a switched capacitor (charge pump) architecture to achieve voltage inversion. Internally, it contains oscillator circuitry, MOSFET switches, and control logic. The device operates by alternately charging and discharging external capacitors in a specific sequence to create the inverted output voltage. During operation, the internal oscillator runs at approximately 250kHz, controlling the switching of internal MOSFETs. This switching action transfers charge from the input to the output through the external capacitors. The result is a regulated negative voltage at the output with typical conversion efficiency of 90% or better under optimal conditions. The device includes internal regulation to maintain output voltage stability across varying load conditions.

商家经验真实案例 · 安全可信
tv7131gl—im参数详解
本文全面解析tv7131gl—im的关键参数,包括其基本规格、性能特点及适用场景,帮助读者快速掌握该设备的核心信息。

Key Features

One of the standout features of the TPS60400DBVT is its exceptionally low quiescent current, typically just 65μA. This makes it ideal for battery-powered applications where power consumption is critical. The device can deliver up to 60mA of output current, sufficient for many low-power analog circuits and sensors. Other notable features include a wide input voltage range (1.8V to 5.5V), no requirement for inductors (reducing EMI concerns), and a compact 5-pin SOT-23 package. The device also offers good line and load regulation characteristics, with the output voltage remaining stable within ±4% over the specified operating conditions. An enable pin allows for power management by putting the device into shutdown mode when not needed.

Application Areas

The TPS60400DBVT finds widespread use in applications requiring a small negative voltage rail derived from a positive power supply. Common applications include biasing for operational amplifiers in single-supply systems, LCD display biasing, sensor interfaces, and data acquisition systems. In portable electronics, the device is often used to generate negative supply rails for audio circuits, RS-232 interfaces, and other analog circuitry. Industrial applications include instrumentation, process control systems, and test equipment where clean, regulated negative voltages are needed. The device's small footprint and simple implementation make it particularly suitable for space-constrained designs in medical devices, wearable technology, and IoT applications.

Maintenance and Precautions

TPS60400DBVT 电源管理芯片 TI 封装N/A 批次2024+深圳市科美奇科技有限公司

While the TPS60400DBVT is a robust device, proper implementation is crucial for reliable operation. Care should be taken with PCB layout, particularly in placing the flying capacitors as close as possible to the device pins to minimize parasitic inductance. The input should be bypassed with a low-ESR capacitor (typically 1μF or greater) placed near the IC. Designers should ensure the input voltage does not exceed the absolute maximum rating of 6V. The device may require heatsinking or derating in high ambient temperature environments when operating at maximum load current. For noise-sensitive applications, additional filtering at the output may be necessary. Always consult the latest datasheet for complete application guidelines and thermal considerations.

商家经验真实案例 · 安全可信
1.5ke43ca参数
本文详细解析1.5KE43CA瞬态电压抑制二极管的关键参数,并介绍双二极管检测的实用技巧,帮助工程师快速判断元件状态。

B2B Procurement Guide

When procuring TPS60400DBVT devices in bulk, buyers should consider several factors to ensure optimal value and supply chain stability. First, verify the required package type (SOT-23-5) and temperature grade (industrial or commercial) for your application. Texas Instruments offers the device in tape-and-reel packaging for automated assembly, with standard reel quantities of 3,000 units. Lead times can vary significantly depending on market conditions, so establishing relationships with authorized distributors is recommended. Consider minimum order quantities (MOQs) and price breaks at different volume tiers. For prototype quantities, many distributors offer sample programs. Always purchase through authorized channels to avoid counterfeit components, and consider second-source alternatives if supply chain redundancy is important for your production.

Related Manufacturers