Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS562202DRLR

Updated: 2026-07-17

Overview

The TPS562202DRLR is a highly integrated synchronous buck converter developed by Texas Instruments. It is designed to provide efficient power conversion for a wide range of electronic devices, particularly in space-constrained applications. The device operates with an input voltage range of 4.5V to 17V and delivers a maximum output current of 2A, making it suitable for powering low-voltage digital circuits such as FPGAs, DSPs, and microcontrollers. With its compact 3mm x 3mm SON package, the TPS562202DRLR is ideal for modern electronics where board space is at a premium. The converter incorporates both high-side and low-side MOSFETs, reducing external component count and simplifying design. Its fixed 500 kHz switching frequency allows for predictable performance while maintaining good efficiency across the operating range.

Structure and Working Principle

KXTJ3-1057 Rohm LGA-12 25+ 电子元器件全新原装现货深圳市茂森源科技有限公司

The TPS562202DRLR utilizes a synchronous rectification architecture to achieve high efficiency power conversion. The integrated control circuitry manages the switching of internal N-channel MOSFETs to regulate the output voltage. A voltage reference and error amplifier compare the feedback voltage with an internal reference to maintain precise output regulation. The device employs pulse-width modulation (PWM) control in normal operation, automatically switching to pulse-frequency modulation (PFM) at light loads to maintain efficiency. Protection features include cycle-by-cycle current limiting, thermal shutdown, and undervoltage lockout. The enable pin allows for power sequencing and shutdown when not in use, reducing standby power consumption.

商家经验真实案例 · 安全可信
阿尔特纳和浓桃筋区别
本文从外观特征、生长习性和适用场景三个方面,对比分析阿尔特纳与浓桃筋的差异,帮助读者清晰区分这两种植物。

Key Features

The TPS562202DRLR offers several notable features that make it attractive for power management applications. Its wide 4.5V to 17V input voltage range accommodates various power sources, including 5V, 12V, and intermediate bus voltages. The converter can deliver up to 2A of continuous output current with excellent line and load regulation. Integrated features include soft-start to limit inrush current, power-good output for system monitoring, and thermal shutdown protection. The device maintains high efficiency (typically >90%) across much of its operating range. Its small package footprint and minimal external component requirements make it particularly suitable for compact designs in networking equipment, industrial controls, and portable electronics.

Application Areas

The TPS562202DRLR finds widespread use in various electronic systems requiring efficient point-of-load power conversion. Common applications include power supplies for FPGAs, ASICs, and processors in networking equipment such as routers and switches. It's also employed in industrial control systems, test and measurement equipment, and embedded computing platforms. Consumer electronics applications include set-top boxes, digital media players, and portable devices. The converter's ability to operate from common voltage rails and its compact form factor make it particularly valuable in space-constrained designs. Automotive applications are possible when qualified to appropriate standards, though the standard version is primarily intended for commercial and industrial use.

Maintenance and Precautions

ON芯片MOC3083M新批号集成电路icUNIDIRECTIONAL深圳市赛能新源半导体有限公司

Proper implementation of the TPS562202DRLR requires attention to several design considerations. Thermal management is crucial, especially when operating at maximum load current or in high ambient temperatures. Adequate PCB copper area for heat dissipation and proper component placement should be ensured. Layout considerations include keeping the high-frequency switching loops as small as possible and using a solid ground plane. Input and output capacitors should be placed close to the device pins. The enable pin should not be left floating, and the feedback network should be routed carefully to avoid noise pickup. Designers should consult the manufacturer's application notes for detailed layout guidelines to optimize performance and reliability.

商家经验真实案例 · 安全可信
单片机接口原理与技术
本文深入解析单片机接口的核心原理与关键技术,包括通信协议选择、硬件设计要点及抗干扰措施,帮助读者掌握嵌入式系统交互设计的核心逻辑与实践方法。

B2B Procurement Guide

When procuring the TPS562202DRLR in volume for business applications, several factors should be considered. Verify the required quantity and lead times, as semiconductor supply chains can experience fluctuations. Consider purchasing from authorized distributors to ensure genuine Texas Instruments products. Evaluate pricing tiers based on order quantities, with typical unit prices ranging from approximately $0.50 to $1.50 depending on volume. For prototype or small quantity needs, sample requests may be available through manufacturer programs. Consider alternative part numbers with similar specifications if availability is constrained. Establish relationships with multiple suppliers to mitigate supply chain risks.

Related Manufacturers