Aicaigou LogoB2B WikiIndustrial Encyclopedia

TPS54227DRCT

Updated: 2026-08-19

Overview

The TPS54227DRCT is a synchronous buck (step-down) converter developed by Texas Instruments, widely used in power management applications. It integrates high-side and low-side MOSFETs, reducing external component count and board space. Designed for efficiency, it operates at a fixed 570 kHz switching frequency, making it suitable for noise-sensitive environments. This IC supports a broad input voltage range (4.5V to 28V) and delivers output currents up to 2.5A. Its compact 3mm x 3mm VSON package makes it ideal for space-constrained designs, such as IoT devices, industrial controllers, and automotive systems.

Structure and Working Principle

PHILIPS  PDIUSBH11NB DIP 21+深圳市东芯盛科技有限公司

The TPS54227DRCT employs a current-mode control architecture, providing fast transient response and stable output under varying loads. The integrated high-side MOSFET switches the input voltage to an LC filter, while the low-side MOSFET synchronizes to minimize conduction losses. Feedback circuitry adjusts the duty cycle to maintain the desired output voltage, which can be set via an external resistor divider. Protection features include overcurrent limiting, thermal shutdown, and undervoltage lockout, ensuring reliable operation in harsh conditions.

商家经验真实案例 · 安全可信
LTD2与LTD3区别
本文详细对比LTD2和LTD3在结构设计、性能参数及应用场景上的差异,帮助读者根据实际需求选择合适型号。

Key Features

High efficiency (up to 95%) is achieved through low RDS(on) MOSFETs and optimized switching control. The device supports adjustable soft-start to limit inrush currents, reducing stress on power sources. Its wide operating temperature range (-40°C to 125°C) suits automotive and industrial applications. Additional advantages include pulse-skipping mode at light loads for improved efficiency and a power-good indicator for system monitoring. These features make the TPS54227DRCT a versatile choice for diverse power supply designs.

Application Areas

Common applications include point-of-load regulation in networking equipment, industrial automation systems, and consumer electronics like set-top boxes. Its robustness also makes it suitable for automotive infotainment and ADAS modules. In embedded systems, the TPS54227DRCT powers FPGAs, DSPs, and microcontrollers. Medical devices benefit from its low noise and high reliability, while portable gadgets leverage its compact footprint and efficiency for extended battery life.

Maintenance and Precautions

TPS54227DRCT 电源管理芯片 TI 封装N/A 批次2024+深圳市科美奇科技有限公司

Proper PCB layout is critical to minimize EMI and thermal issues. Place input capacitors close to the VIN and GND pins, and use a ground plane for heat dissipation. Ensure adequate airflow or heatsinking for high-current applications. Avoid exceeding the absolute maximum ratings (e.g., 30V input voltage) to prevent damage. Regularly inspect solder joints and thermal performance in field deployments, especially in vibration-prone environments like automotive systems.

商家经验真实案例 · 安全可信
ka3846和uc3846区别
本文对比分析ka3846与uc3846两款芯片的差异,包括功能特性、应用场景及性能表现,帮助用户快速了解两者区别并做出合适选择。

B2B Procurement Guide

When sourcing the TPS54227DRCT, verify authenticity through authorized distributors like TI’s official partners to avoid counterfeit components. Bulk orders (reels of 3,000 units) typically offer cost savings of 15-30% compared to small quantities. Evaluate alternative part numbers (e.g., TPS54227DRCR for tape-and-reel packaging) if applicable. Lead times vary by supplier; plan inventory with 8-12 weeks’ buffer for stable supply chain management. Request samples for prototype testing before large-scale procurement.

Related Manufacturers