Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS40193DRCR

Updated: 2026-07-29

Overview

The TPS40193DRCR is a synchronous buck controller IC manufactured by Texas Instruments, designed for high-efficiency DC-DC power conversion. This surface-mount device comes in a 10-pin VSON package (DRC) and operates over a wide input voltage range of 4.5V to 36V, making it suitable for various industrial and automotive applications. The controller features adjustable output voltage down to 0.8V and supports switching frequencies up to 1MHz. Its synchronous rectification architecture significantly improves efficiency compared to traditional buck converters, particularly in medium to high current applications.

Structure and Working Principle

TPS40193DRCR 电源芯片 TI德州仪器 封装SON10 批号25+深圳市中芯巨能电子有限公司

The TPS40193DRCR employs a voltage-mode control architecture with internal compensation, simplifying the design process. The IC drives external N-channel MOSFETs to implement the buck converter topology. The controller includes an internal gate driver with adaptive dead-time control to optimize efficiency. The device operates by comparing the output voltage (via feedback) with an internal reference, then adjusting the PWM duty cycle to maintain regulation. Key internal blocks include an error amplifier, PWM comparator, oscillator, and gate drivers. The IC also incorporates various protection features including overcurrent protection, undervoltage lockout, and thermal shutdown.

商家经验真实案例 · 安全可信
中山监视器柚木
本文探讨了中山地区监视器与柚木材料的结合应用,分析了柚木在监视器外壳制造中的优势,以及这种材料选择对产品耐用性和美观性的提升。

Key Features

The TPS40193DRCR offers several notable features that make it suitable for demanding applications. Its wide input voltage range (4.5V to 36V) accommodates various power sources, including automotive battery systems. The device supports output currents up to 20A (with appropriate external components) and achieves efficiency levels exceeding 95%. Additional features include programmable soft-start, power-good output, and synchronization capability. The controller's 1MHz maximum switching frequency allows for smaller external components, reducing solution size. The device also includes comprehensive protection features such as hiccup-mode overcurrent protection and thermal shutdown.

Application Areas

The TPS40193DRCR finds widespread use in industrial and automotive power systems. Common applications include point-of-load regulation in telecom equipment, industrial automation systems, and automotive infotainment systems. The device's robust design makes it suitable for harsh environments. Other typical applications include power supplies for FPGA and DSP systems, distributed power architectures, and battery-powered equipment. The controller's wide input range makes it particularly useful for automotive applications where the input voltage can vary significantly during cold-crank or load-dump conditions.

Maintenance and Precautions

TPS40193DRCR TPS40193 TI德州仪器 QFN64 稳压器 原装现货可直拍深圳市芯齐壹科技有限公司

Proper handling and implementation are crucial for reliable operation of the TPS40193DRCR. ESD precautions should be observed during handling and assembly, as with all semiconductor devices. Adequate PCB layout practices must be followed to minimize noise and ensure stable operation. Thermal management is important, especially in high-current applications. The external MOSFETs and inductor should be selected to handle the expected current with appropriate margin. Input and output capacitors should be chosen based on the application's ripple current and voltage requirements. Regular inspection of solder joints is recommended in high-vibration environments.

商家经验真实案例 · 安全可信
放大监视器组件
本文探讨放大监视器组件的核心功能与应用场景,解析其技术特点与使用注意事项,帮助读者全面了解这一工业设备的关键部件。

B2B Procurement Guide

When procuring TPS40193DRCR in bulk quantities, consider several important factors. Verify the authenticity of components, as counterfeit semiconductors are a known industry issue. Work with authorized distributors or directly with Texas Instruments to ensure genuine parts. Lead times can vary depending on market conditions, so plan procurement accordingly. For prototype quantities, consider sampling programs offered by the manufacturer. Evaluate packaging options (tape and reel vs. cut tape) based on your assembly process requirements. For high-reliability applications, consider requesting extended temperature range or automotive-grade versions if available.

Related Manufacturers