Aicaigou LogoB2B WikiIndustrial Encyclopedia

TPS3847085DBVR

Updated: 2026-08-16

Overview

The TPS3847085DBVR is a voltage supervisor integrated circuit (IC) designed to monitor power supply voltages in electronic systems. It is commonly used in applications where precise voltage monitoring is required to ensure system stability and reliability. The device is known for its low power consumption, making it suitable for battery-powered and portable devices. The TPS3847085DBVR is part of a family of voltage supervisors that offer various threshold voltages and reset timeout periods. It is available in a small SOT-23 package, which is ideal for space-constrained designs. The IC is widely used in consumer electronics, industrial equipment, and automotive applications.

Structure and Working Principle

TPS3847085DBVR 电源控制器/监视器 TI/德州仪器 封装SOT23-5 批号19+深圳市春林微电子科技有限公司

The TPS3847085DBVR consists of a voltage reference, comparator, and delay circuitry. It continuously monitors the input voltage and compares it to a preset threshold. If the voltage falls below the threshold, the IC asserts a reset signal to the microcontroller or other system components. The device features a built-in delay timer to ensure that the reset signal remains active for a sufficient duration, allowing the system to stabilize before operation resumes. This delay can be adjusted externally in some variants of the IC. The TPS3847085DBVR operates with very low quiescent current, typically in the microampere range, which minimizes power consumption.

商家经验真实案例 · 安全可信
FD71电子管互换指南
本文详细解析FD71电子管的可互换型号,包括直接替换和需要调整的型号,帮助用户在不影响音质的情况下灵活选择替代方案。

Key Features

One of the standout features of the TPS3847085DBVR is its low power consumption, which makes it ideal for battery-operated devices. The IC typically draws less than 1 µA of current, ensuring minimal impact on battery life. Another key feature is its high accuracy, with a typical threshold accuracy of ±1.5%. This ensures reliable operation even in demanding environments. The device also offers a wide operating voltage range, typically from 1.6V to 5.5V, making it versatile for various applications. The small SOT-23 package is another advantage, enabling use in compact designs.

Application Areas

The TPS3847085DBVR is commonly used in consumer electronics, such as smartphones, tablets, and wearables, where reliable voltage monitoring is critical. It is also employed in industrial control systems, automotive electronics, and medical devices. In industrial applications, the IC ensures that microcontrollers and other critical components operate within safe voltage limits, preventing system failures. In automotive systems, it provides robust voltage monitoring for infotainment systems, engine control units, and other electronic modules. The device's low power consumption and high accuracy make it suitable for a wide range of applications.

Maintenance and Precautions

TPS3847085DBVR 电源控制器/监视器 TI 封装SOT23-5 批次2021+深圳市国泰盛科技有限公司

When handling the TPS3847085DBVR, it is important to observe electrostatic discharge (ESD) precautions to prevent damage to the IC. Proper storage in anti-static bags and the use of grounded workstations are recommended. During installation, ensure that the input voltage does not exceed the specified maximum rating to avoid damaging the device. Proper PCB layout and decoupling capacitors should be used to minimize noise and ensure stable operation. Regular testing and monitoring of the IC's performance in the application are also advisable to maintain system reliability.

商家经验真实案例 · 安全可信
uln2003供电引脚
本文详细解析ULN2003驱动芯片的供电引脚配置,包括电源连接方式、典型应用电路中的接法以及常见问题排查技巧,帮助读者快速掌握该芯片的供电设计要点。

B2B Procurement Guide

When procuring the TPS3847085DBVR in bulk, it is important to verify the authenticity of the supplier to avoid counterfeit components. Reputable distributors and manufacturers should be prioritized. Consider the specific requirements of your application, such as the voltage threshold, accuracy, and package size, when selecting the IC. Lead times and minimum order quantities (MOQs) should also be taken into account. For reference, the price per unit typically ranges from $0.50 to $1.50, depending on the order volume and supplier. Always request samples for testing before committing to large orders.

Related Manufacturers