Aicaigou LogoB2B WikiIndustrial Encyclopedia

TPS3103K33DBVR

Updated: 2026-07-31

Overview

The TPS3103K33DBVR is a voltage supervisor IC manufactured by Texas Instruments, designed to monitor system voltages and ensure reliable operation of electronic circuits. It is particularly useful in applications where stable voltage levels are critical, such as in microcontrollers and embedded systems. The device operates with a fixed threshold voltage of 3.3V, making it suitable for low-voltage applications. The TPS3103K33DBVR is housed in a compact SOT-23 package, which is ideal for space-constrained designs. Its low power consumption and high accuracy make it a popular choice for battery-powered and portable devices. The IC generates a reset signal when the supply voltage falls below the threshold, ensuring that the system remains in a known state during power anomalies.

Structure and Working Principle

TPS3103K33DBVR 电源控制器/监视器 SOT-23-6 过温保护深圳市新思汇科技有限公司

The TPS3103K33DBVR consists of a voltage reference, a comparator, and an output driver. The voltage reference ensures a stable threshold level, while the comparator monitors the input voltage. When the input voltage drops below the threshold, the comparator triggers the output driver to assert a reset signal. The device operates with a supply voltage range of 1.1V to 6.5V, making it versatile for various applications. The reset output is active-low, meaning it pulls low when a fault condition is detected. The TPS3103K33DBVR also includes a built-in delay circuit to prevent false resets during transient voltage fluctuations.

商家经验真实案例 · 安全可信
阻容耦合为何需电阻
本文解析阻容耦合电路中电阻的必要性,从信号传输、直流偏置和电路稳定性三个维度,揭示电阻在阻容耦合中的核心作用,帮助理解电路设计基础原理。

Key Features

One of the standout features of the TPS3103K33DBVR is its ultra-low quiescent current, typically around 1.5µA, which minimizes power consumption in battery-operated devices. The fixed 3.3V threshold voltage is accurate to within ±1.5%, ensuring reliable performance across temperature and process variations. The small SOT-23 package (DBV) is another key advantage, enabling the IC to be used in compact designs. The device also offers a manual reset input, allowing for external control of the reset signal. These features make the TPS3103K33DBVR a versatile and efficient solution for voltage monitoring in a wide range of applications.

Application Areas

The TPS3103K33DBVR is widely used in industrial and consumer electronics, particularly in systems requiring stable voltage monitoring. Common applications include microcontrollers, digital signal processors (DSPs), and field-programmable gate arrays (FPGAs), where it ensures proper initialization during power-up and shutdown. In addition, the IC is employed in IoT devices, portable electronics, and battery-powered systems, where its low power consumption and small form factor are highly advantageous. Automotive and medical devices also benefit from the TPS3103K33DBVR's reliability and precision, making it a versatile component in critical systems.

Maintenance and Precautions

TPS3103K33DBVR TPS3103K33 TI德州仪器 SOT23-6 电源管理 原现可直拍深圳市芯齐壹科技有限公司

To ensure optimal performance of the TPS3103K33DBVR, it is important to adhere to the recommended operating conditions specified in the datasheet. Avoid exposing the device to voltages beyond its maximum ratings, as this can cause permanent damage. Proper PCB layout and decoupling capacitors are essential to minimize noise and ensure stable operation. When soldering the SOT-23 package, follow industry-standard reflow or hand-soldering techniques to prevent thermal stress. Regular testing and validation of the reset functionality are recommended, especially in mission-critical applications, to ensure long-term reliability.

商家经验真实案例 · 安全可信
27v变6v接灯串电阻
本文详细讲解如何为27V电源接6V贴片灯串选取合适电阻,包括计算方法、实际应用中的注意事项以及常见问题解决方案,帮助读者轻松完成电路适配。

B2B Procurement Guide

When procuring the TPS3103K33DBVR in bulk, it is advisable to source from authorized distributors or directly from Texas Instruments to ensure authenticity and quality. Lead times and pricing can vary based on market demand, so planning ahead is crucial for large-scale projects. For cost-sensitive applications, consider negotiating volume discounts or exploring alternative packaging options. Always verify the part number and specifications to avoid compatibility issues. Additionally, check for compliance with industry standards, such as RoHS and REACH, to meet environmental and regulatory requirements.

Related Manufacturers