TPS259521DSGR

Updated: 2026-08-06

Overview

The TPS259521DSGR is a highly integrated electronic fuse solution developed by Texas Instruments for robust circuit protection. As part of TI's advanced eFuse portfolio, it combines overvoltage, overcurrent, and reverse current protection in a single compact package. This device is particularly valuable in industrial automation, telecommunications infrastructure, and automotive systems where reliable power management is critical. The TPS259521DSGR stands out for its programmable features, allowing engineers to customize protection thresholds for specific applications. Its small footprint (DSGR package) makes it suitable for space-constrained designs while maintaining high performance. The device operates across a wide input voltage range, typically from 2.7V to 18V, accommodating various power supply configurations.

Structure and Working Principle

The TPS259521DSGR integrates several key components: a power MOSFET, current sensing circuitry, thermal protection, and control logic. The MOSFET serves as the main switching element, while the current sensing mechanism continuously monitors load conditions. When abnormal conditions are detected (overcurrent, short circuit, etc.), the device rapidly disconnects the load to prevent damage. The working principle involves real-time monitoring of voltage and current parameters. The device compares these values against user-programmable thresholds set via external resistors. If thresholds are exceeded, the internal MOSFET switches off within microseconds. The thermal shutdown feature provides additional protection by disabling the device when junction temperature exceeds safe limits (typically 150°C).

Key Features

Among its standout features, the TPS259521DSGR offers precise current limiting with ±5% accuracy, ensuring reliable protection without unnecessary tripping. The adjustable current limit (from 0.5A to 5.5A) allows customization for different applications. Its ultra-low quiescent current (typically 30µA) minimizes power loss during normal operation. The device also provides comprehensive fault reporting through its open-drain status pin, enabling system monitoring and diagnostics. Fast response time (<1µs for overvoltage events) ensures sensitive electronics are protected from transient events. The reverse current blocking feature prevents damage from incorrect power supply connections, particularly valuable in battery-powered systems.

Application Areas

The TPS259521DSGR finds extensive use in industrial automation systems, protecting sensitive PLCs, sensors, and control modules from power anomalies. In telecommunications, it safeguards base station equipment and network switches from voltage transients and wiring faults. Automotive applications include infotainment systems, ADAS modules, and electronic control units. Server and storage systems benefit from its protection capabilities for hot-swap boards and peripheral connections. The device is also employed in medical equipment where reliable power management is crucial for patient safety. Its wide operating temperature range (-40°C to 125°C) makes it suitable for harsh environments encountered in many of these applications.

Maintenance and Precautions

While the TPS259521DSGR is designed for maintenance-free operation, proper PCB layout is essential for optimal performance. Adequate thermal vias and copper area should be provided for heat dissipation, especially when operating near maximum current ratings. The device's exposed thermal pad must be properly soldered to the PCB for effective heat transfer. Designers should ensure input capacitors are placed close to the device pins to minimize parasitic inductance. External components (like current limit setting resistors) should use 1% tolerance parts for accurate protection thresholds. During system debugging, monitoring the FLT pin can provide valuable diagnostic information about protection events.

B2B Procurement Guide

When sourcing TPS259521DSGR components, B2B buyers should verify they're purchasing from authorized Texas Instruments distributors to ensure authenticity. Common packaging options include tape and reel (3000 units per reel) suitable for automated assembly. Lead times typically range from 4-8 weeks for standard orders, though some distributors may maintain inventory. For high-volume purchases (10,000+ units), buyers can negotiate better pricing through direct engagement with TI or its major distribution partners. Consider ordering evaluation modules (TPS259521EVM) for testing before large-scale deployment. Quality-conscious buyers should request certification documentation (RoHS, REACH compliance) and consider ordering samples for verification testing.