Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS22913 Load Switch

Updated: 2026-07-21

Overview

The TPS22913 is a compact, high-efficiency load switch from Texas Instruments, designed to manage power distribution in space-constrained electronic systems. It integrates a low-resistance MOSFET and control circuitry to minimize voltage drop and power loss. Commonly used in smartphones, tablets, and IoT devices, it enables efficient power gating for subsystems. With a typical on-resistance of 20mΩ, the TPS22913 reduces energy waste during operation. Its fast turn-on/turn-off times (microsecond range) make it suitable for applications requiring rapid power cycling. The device operates from 1V to 5.5V, accommodating diverse battery configurations.

Structure and Working Principle

TPS22913CYZVR PMIC/负载驱动器 TI德州仪器 封装DSBGA4 批号26+深圳市中芯巨能电子有限公司

The TPS22913 combines a N-channel MOSFET with a charge pump and logic control in a single chip. When enabled, the charge pump drives the MOSFET gate to achieve full enhancement, minimizing conduction losses. An integrated slew-rate controller prevents inrush currents during turn-on. The device includes protection features like thermal shutdown and undervoltage lockout. Its quiescent current (typically 1µA) ensures minimal impact on battery life in standby modes. The small DSBGA or WSON package options (as small as 0.8mm × 0.8mm) suit high-density PCB designs.

商家经验真实案例 · 安全可信
三极管单管放大电路原理
本文深入浅出地解析三极管单管放大电路的工作原理,从基本结构到信号放大过程,再到典型应用场景,帮助读者轻松掌握这一电子技术中的核心知识点。

Key Features

Ultra-low on-resistance (20mΩ typical) significantly reduces power dissipation compared to discrete solutions. The device supports up to 3A continuous current, with surge capability for capacitive loads. Fast switching (10µs typical turn-on) enables quick power state transitions. A configurable slew rate (via external capacitor) allows tuning for specific load requirements. The TPS22913 also offers reverse current blocking when disabled, protecting upstream power sources. Its wide operating temperature range (-40°C to +85°C) ensures reliability in harsh environments.

Application Areas

Primary applications include battery-powered portable electronics where energy efficiency is critical. It's commonly used to power sensors, memory modules, or peripherals in smartphones and wearables. Industrial uses include power sequencing in embedded systems and PLCs. In IoT devices, the TPS22913 enables selective power-down of unused subsystems to extend battery life. Automotive infotainment systems employ it for controlled power distribution to secondary components. Medical devices benefit from its low leakage current in sleep modes.

Maintenance and Precautions

集成电路IC TPS22913BYZVR TI(德州仪器) DSBGA-4 功率电子开关芯片深圳市金华洋世纪科技有限公司

No routine maintenance is required for the TPS22913, but proper PCB layout is essential. Place bypass capacitors close to the input pins, and use adequate thermal vias for high-current applications. Avoid exceeding absolute maximum ratings (6V input voltage, 4A peak current). ESD precautions should be followed during handling—the device is sensitive to HBM Class 2 (2000V). For reliability, operate within the recommended junction temperature range. In fault conditions, the thermal shutdown feature automatically disables the switch until temperatures normalize.

商家经验真实案例 · 安全可信
滤波器替换原则
本文详细解析滤波器更换的三大核心原则,包括性能匹配、环境适应性和经济性评估,帮助技术人员在工业场景中做出合理决策,避免因更换不当引发的系统风险。

B2B Procurement Guide

When sourcing TPS22913 units, verify authenticity through authorized distributors like Arrow, Avnet, or TI Direct. Minimum order quantities typically start at 3,000 units for volume pricing. Lead times vary from stock availability to 8–12 weeks for large custom orders. Evaluate alternative part numbers (e.g., TPS22913A for different enable logic) if design flexibility exists. Request samples for prototype testing—Texas Instruments often provides evaluation modules. For long-term projects, consider securing annual purchase agreements to stabilize pricing and availability.

Related Manufacturers