Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS2062DR

Updated: 2026-07-19

Overview

The TPS2062DR is a dual-channel power switch IC designed by Texas Instruments for managing power distribution in electronic systems. It integrates two 0.7A (max) load switches with independent enable controls, making it ideal for USB ports or peripheral power rails. The device operates at 2.7V to 5.5V input voltage and features fast overcurrent response (<2µs) to protect downstream circuits. Its compact SOIC-8 package suits space-constrained designs, while the low 1µA standby current minimizes power waste in idle modes. The TPS2062DR is widely adopted in consumer electronics, industrial automation, and embedded systems due to its reliability and compliance with USB power standards.

Structure and Working Principle

TPS2062DR PMIC/负载驱动器 TI德州仪器 封装SOP8 批号26+深圳市中芯巨能电子有限公司

The TPS2062DR consists of two N-channel MOSFET switches with built-in charge pumps to ensure full gate drive voltage. Each channel includes current-sensing circuitry that triggers a fast shutdown during overloads (e.g., short circuits). A thermal shutdown feature activates at ~140°C to prevent damage from excessive heat buildup. When enabled (via logic-high EN pin), the switch passes power to the output with a typical 80mΩ on-resistance, minimizing voltage drop. The fault flag (FLT) pin provides open-drain output to signal overcurrent or thermal events, enabling system-level diagnostics.

商家经验真实案例 · 安全可信
32英寸电视电源芯片型号
本文解析32英寸电视电源芯片的常见型号及功能特点,帮助用户了解电源芯片在电视中的作用,并提供识别芯片型号的实用方法。

Key Features

1. **Dual Independent Channels**: Enables control of two power rails (e.g., USB data and charging ports) with separate fault reporting. 2. **Precise Current Limiting**: Fixed 0.7A threshold per channel (±15% tolerance) safeguards connected devices. 3. **Low Power Design**: 1µA standby current suits battery-powered applications. 4. **Robust Protection**: Combines thermal shutdown and reverse-current blocking for system reliability. Additional advantages include a wide -40°C to 85°C operating range and compatibility with 3.3V/5V logic levels, simplifying integration into diverse designs.

Application Areas

The TPS2062DR is commonly deployed in: - **USB Hubs/Ports**: Safely manages power to multiple peripherals while meeting USB 2.0 current limits. - **Industrial Controls**: Protects PLC I/O modules or sensor nodes from wiring faults. - **Consumer Electronics**: Used in set-top boxes, gaming consoles, and smart home devices for power sequencing. - **Portable Devices**: Ideal for tablets or handheld tools requiring multiple switched power domains. Its fault reporting capability also supports predictive maintenance in B2B applications, reducing downtime.

Maintenance and Precautions

TPS2062DR 贴片SOP-8 模拟开关/多路复用器IC芯片 TI/德州仪器深圳市博雅盈达科技有限公司

1. **Thermal Management**: Ensure adequate PCB copper area for heat dissipation, especially in high-ambient-temperature environments. 2. **Current Limits**: Do not exceed 0.7A continuous current per channel to avoid false tripping or damage. 3. **ESD Protection**: Handle with anti-static precautions during assembly, as MOSFET gates are sensitive to discharge. For diagnostics, monitor the FLT pin with a microcontroller to log fault events (e.g., prolonged overloads indicating wiring issues).

商家经验真实案例 · 安全可信
x5024ph电源芯片参数详解
本文深入解析x5024ph电源芯片的关键参数,包括输入输出电压范围、转换效率、工作温度等核心性能指标,并探讨其典型应用场景与设计注意事项,为工程师选型提供实用参考。

B2B Procurement Guide

1. **Volume Pricing**: Negotiate discounts for orders >1,000 units; prices typically drop 20-30% at 10k+ quantities. 2. **Lead Times**: Stock availability varies; Texas Instruments distributors usually hold 4-8 weeks of inventory. 3. **Alternatives**: Compare with TPS2052 (single-channel) or TPS2066 (higher current) for cost/performance trade-offs. 4. **Certifications**: Verify RoHS/REACH compliance documentation for EU market shipments. For prototyping, sample kits (e.g., TI’s TPS2062EVM-001) help validate design compatibility before bulk orders.

Related Manufacturers