Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPS2041BDBVRG4

Updated: 2026-08-06

Overview

The TPS2041BDBVRG4 is a single-channel power distribution switch with integrated current limiting and thermal protection, designed by Texas Instruments. It is widely used in USB hubs, industrial controls, and portable electronics to manage power delivery safely. The device operates within a 2.7V to 5.5V input range and supports up to 500mA continuous current. Packaged in a space-saving SOT-23-5 format, this IC combines precision analog circuitry with robust protection features. Its fast response to fault conditions (typically <1µs) minimizes damage risks to connected devices. The TPS2041BDBVRG4 is RoHS-compliant and suitable for -40°C to 85°C operating environments.

Structure and Working Principle

MM74HC74AMTC 触发器 TSSOP14 引脚图 功能 工作温度深圳市云迪科技有限公司

The TPS2041BDBVRG4 integrates a MOSFET switch, current-sensing circuitry, and thermal protection in a single chip. When enabled, the internal N-channel MOSFET allows current flow to the output. The current-limiting circuit monitors load conditions continuously, reducing conductance if the preset threshold (adjustable via external resistor) is exceeded. Thermal shutdown activates independently at approximately 140°C, disabling the switch until temperatures normalize. The device includes reverse-current blocking and features a low 30µA typical standby current. Fault conditions are indicated through the status pin, enabling system-level monitoring and diagnostics.

商家经验真实案例 · 安全可信
谐振器带宽公式
本文解析谐振器带宽的计算原理与关键影响因素,通过直观类比和公式拆解,帮助读者理解如何评估谐振器的频率选择特性,并探讨实际应用中的优化思路。

Key Features

Precision current limiting (±15% accuracy) allows customized protection thresholds from 50mA to 500mA. The thermal shutdown feature provides secondary protection against sustained overloads or ambient temperature extremes. With a low 80mΩ (typical) on-resistance, the switch minimizes power loss and voltage drop during normal operation. The TPS2041BDBVRG4 offers controlled rise times (soft-start) to prevent inrush currents, critical for sensitive microcontroller applications. Its wide operating voltage range accommodates both 3.3V and 5V systems. The device's compact SOT-23-5 package (2.9mm × 1.6mm) makes it ideal for space-constrained PCB designs.

Application Areas

Primary applications include USB port power management in computers, docking stations, and hubs, where it prevents damage from short circuits. Industrial control systems use it for distributed power rail protection in PLCs and sensor interfaces. The switch is equally valuable in battery-powered devices (e.g., medical equipment, IoT nodes) to extend runtime by minimizing quiescent current. Consumer electronics manufacturers implement the TPS2041BDBVRG4 in set-top boxes, gaming peripherals, and smart home devices. Automotive aftermarket applications include infotainment systems and accessory power distribution, though it's not AEC-Q100 qualified for primary vehicle systems.

Maintenance and Precautions

TPS2041BDBVRG4 电子元器件 TI PDF 数据手册 资料 规格书深圳市西昂特科技有限公司

No routine maintenance is required, but designers should ensure PCB layouts follow thermal guidelines (≥2oz copper recommended for high-current paths). Avoid continuous operation near current limits, as this may trigger thermal cycling. The device is sensitive to ESD; employ standard handling procedures during assembly. For reliable operation, maintain input voltage within specified limits and derate current capacity at elevated ambient temperatures. The enable pin should not be left floating—tie it high or low as needed. When paralleling multiple devices for higher current, include individual current-limiting resistors to prevent imbalance.

商家经验真实案例 · 安全可信
i5处理器成本分析
本文探讨i5处理器的成本构成,包括原材料、生产工艺及市场因素对价格的影响,帮助读者理解其定价背后的逻辑。

B2B Procurement Guide

When sourcing the TPS2041BDBVRG4, verify authenticity through authorized distributors like TI Direct, Arrow, or Avnet. MOQ typically starts at 1 reel (3,000 units), with pricing tiers at 1k, 5k, and 10k quantities. Lead times vary from stock availability to 8-12 weeks for non-standard volumes. Consider alternate part numbers (e.g., TPS2041BDBVT for tape-and-reel) if packaging preferences differ. Evaluate second-source options like FPF200x series (Fairchild) for supply chain redundancy. For prototype quantities, sample requests are often available through manufacturer portals with valid company credentials.

Related Manufacturers