Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TPD4E001DBVR

Updated: 2026-08-06

Overview

The TPD4E001DBVR is a four-channel ESD protection diode array from Texas Instruments, designed to shield sensitive electronic components from electrostatic discharge (ESD) and transient voltage events. It is housed in a compact SOT-23 package, making it suitable for space-constrained designs. With a ultra-low capacitance of 0.5pF (typical) per channel, it minimizes signal distortion in high-speed data lines such as USB 2.0/3.0, HDMI, and memory interfaces. This device meets IEC 61000-4-2 Level 4 standards, offering robust protection up to ±8kV contact discharge. Its low leakage current (1nA max) ensures minimal power loss, while the fast response time clamps transient voltages before they damage downstream circuitry. The TPD4E001DBVR is widely adopted in consumer electronics, industrial controls, and automotive systems due to its reliability and cost-effectiveness.

Structure and Working Principle

电子元器件芯片 TPD4E001DBVR TVS二极管 TI/德州仪器 22+封装SOP-8米德高斯大数据科技(上海)股份有限公司

The TPD4E001DBVR integrates four bidirectional TVS (Transient Voltage Suppression) diodes, each connected between an I/O line and ground. When an ESD event occurs, the diode rapidly conducts excess current to ground, limiting the voltage spike to a safe level (typically <10V). The device's silicon-based construction ensures consistent performance across temperatures ranging from -40°C to 125°C. Key internal features include a low-trigger-voltage SCR (Silicon-Controlled Rectifier) structure, which provides a low-impedance path during transient events. The symmetrical design allows protection for both positive and negative voltage surges. Unlike traditional clamping diodes, the TPD4E001DBVR avoids latch-up effects, ensuring automatic recovery after an ESD event.

商家经验真实案例 · 安全可信
固定式监视器维修
本文探讨固定式监视器的常见故障类型、维修步骤及预防措施,帮助用户快速识别问题并采取相应解决方案,延长设备使用寿命。

Key Features

1. **Ultra-Low Capacitance**: At 0.5pF per channel, it preserves signal integrity in high-speed data lines (up to 5Gbps), making it ideal for USB 3.0 and HDMI applications. 2. **High ESD Robustness**: Complies with IEC 61000-4-2 Level 4 (±8kV contact, ±15kV air discharge) and withstands multiple strikes without degradation. 3. **Miniature Footprint**: The SOT-23-6 package (2.9mm × 2.8mm) saves board space in portable devices. Additional advantages include a wide operating voltage range (0V to 5.5V) and compatibility with automated PCB assembly processes. Its RoHS compliance and halogen-free construction align with environmental regulations.

Application Areas

The TPD4E001DBVR is commonly used in: 1. **Consumer Electronics**: Smartphones, tablets, and laptops for USB/HDMI port protection. 2. **Industrial Equipment**: PLCs, sensors, and communication modules exposed to harsh ESD environments. 3. **Automotive Systems**: Infotainment interfaces and CAN bus lines, where reliability is critical. It is also deployed in medical devices, IoT hubs, and wearables to prevent data corruption or hardware failure caused by static discharge. Designers often place it near connectors or vulnerable ICs to create a first line of defense.

Maintenance and Precautions

TPD4E001DBVR TVS二极管 电子元器件 批次25+一站式配单承泽电子(北京)有限公司

To ensure optimal performance: - **PCB Layout**: Place the TPD4E001DBVR as close as possible to the protected connector, with short traces to ground. Use a solid ground plane to minimize inductance. - **Handling**: Follow ESD-safe practices during installation to avoid pre-exposure damage. Avoid mechanical stress on the SOT-23 package. Do not exceed the maximum working voltage (5.5V) or current (1A per line). For applications with sustained overvoltage risks (e.g., power surges), supplement with additional protection devices like fuses or varistors.

商家经验真实案例 · 安全可信
ddccl(hl)和旧版区别
本文详细对比ddccl(hl)与旧版在功能、性能和使用体验上的主要差异,帮助用户了解升级后的改进点,为选择提供参考。

B2B Procurement Guide

1. **Volume Pricing**: Negotiate discounts for orders above 1,000 units; prices often drop below $0.15/unit at scale. 2. **Lead Time**: Typically 6-8 weeks for custom quantities; verify stock with authorized distributors like Digi-Key or Mouser. 3. **Alternatives**: Compare with similar devices (e.g., NXP IP4234CZ6 or ON Semiconductor ESD7004) for cost or performance trade-offs. Always purchase from TI-authorized suppliers to avoid counterfeit parts. Request compliance certificates (RoHS, REACH) for regulatory documentation. For prototype builds, consider sample kits offered by manufacturers.

Related Manufacturers