Aicaigou LogoB2B Wiki

TMP102AQDRLRQ1

Updated: 2026-09-09

Overview

The TMP102AQDRLRQ1 is a digital temperature sensor designed for precision temperature measurement in various electronic applications. It is widely used in industrial, automotive, and consumer electronics due to its compact size and reliable performance. This sensor communicates via the I2C interface, making it easy to integrate into existing systems. Its low power consumption makes it ideal for battery-powered devices, ensuring long operational life without frequent replacements.

Structure and Working Principle

The TMP102AQDRLRQ1 consists of a temperature-sensitive element and an analog-to-digital converter (ADC) that digitizes the temperature readings. The sensor uses a bandgap temperature sensor to achieve high accuracy across a wide temperature range. The digital output is transmitted via the I2C bus, allowing for easy interfacing with microcontrollers and other digital systems. The sensor also includes programmable alert functionality, which can trigger interrupts when temperature thresholds are exceeded.

Key Features

One of the standout features of the TMP102AQDRLRQ1 is its high accuracy, with a typical error of ±0.5°C over a range of -25°C to +85°C. This makes it suitable for applications requiring precise temperature monitoring. Additionally, the sensor operates at very low power, consuming just 10µA in continuous conversion mode. Its small form factor and minimal external component requirements further enhance its versatility in space-constrained designs.

Application Areas

The TMP102AQDRLRQ1 is commonly used in industrial automation, where precise temperature monitoring is critical for process control. It is also found in automotive systems, such as climate control and battery management. In consumer electronics, this sensor is used in smartphones, laptops, and wearable devices to monitor device temperature and prevent overheating. Its reliability and ease of integration make it a popular choice across various industries.

Maintenance and Precautions

To ensure optimal performance, the TMP102AQDRLRQ1 should be protected from extreme environmental conditions, such as excessive heat or moisture. Proper PCB layout and shielding can help minimize interference and improve accuracy. Regular calibration is not typically required, but it is advisable to verify sensor readings periodically, especially in critical applications. Always follow the manufacturer's guidelines for handling and installation to avoid damage.

B2B Procurement Guide

When sourcing the TMP102AQDRLRQ1, verify the supplier's authenticity to avoid counterfeit products. Reputable distributors and direct purchases from the manufacturer are recommended. Consider bulk purchasing for cost savings, as prices often decrease with larger order quantities. Ensure the sensor's specifications match your application requirements, including temperature range, accuracy, and power consumption.

Related Manufacturers