Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLV70518PYFPR

Updated: 2026-07-15

Overview

The TLV70518PYFPR is a low-dropout (LDO) voltage regulator manufactured by Texas Instruments, designed to deliver stable power in space-constrained and battery-operated devices. Its compact SOT-23 package and high efficiency make it suitable for applications like IoT sensors, wearables, and medical devices. With an output voltage of 1.8V, it supports input voltages up to 6V and provides a maximum output current of 150mA. The device is engineered for precision, featuring a tight output voltage tolerance and minimal noise interference, critical for analog and RF circuits.

Structure and Working Principle

TLV70518PYFPR 电源管理芯片 TI 封装DSBGA4 批次21+雅创芯城(深圳)供应链有限公司

The TLV70518PYFPR integrates a pass transistor, error amplifier, and reference voltage circuit to maintain a consistent output voltage despite fluctuations in input or load conditions. Its low dropout voltage (typically 110mV at 150mA) ensures efficient operation even when the input voltage is close to the output level. The regulator employs a PMOS pass element, reducing quiescent current to just 35µA, which extends battery life in portable devices. Built-in protection features include thermal shutdown and current limiting, safeguarding the component and downstream circuitry.

商家经验真实案例 · 安全可信
CV模式电源芯片低压输出
本文解析CV模式电源芯片实现低压输出的三种技术路径,包括反馈电阻网络调节、内部基准电压优化及动态负载响应设计,并探讨实际应用中的注意事项。

Key Features

Key advantages of the TLV70518PYFPR include its high power supply rejection ratio (PSRR) of 70dB at 1kHz, which minimizes noise from input sources. Its low output noise (30µVRMS) is ideal for sensitive analog applications like audio amplifiers or data converters. Additionally, the device offers a fast transient response, critical for modern microcontrollers and wireless modules. Its enable pin allows for power sequencing or shutdown modes, further optimizing energy consumption in intermittent-use scenarios.

Application Areas

This LDO is widely used in battery-powered electronics such as Bluetooth modules, GPS trackers, and handheld medical devices. Its stability and low noise also make it suitable for powering sensors, MEMS devices, and precision analog circuits in industrial automation. In consumer electronics, the TLV70518PYFPR is commonly found in smartwatches, wireless earbuds, and other compact wearables. Automotive applications include infotainment systems and telematics, where reliable voltage regulation is essential.

Maintenance and Precautions

TLV70518PYFPR 电源管理芯片 TI德州仪器 封装DSBGA4 批次25+深圳市永芯易科技有限公司

To ensure longevity, avoid exposing the TLV70518PYFPR to input voltages exceeding 6V or reverse polarity. Proper PCB layout is crucial: place input and output capacitors as close as possible to the IC to minimize parasitic inductance. For high-current applications, consider thermal vias or a copper pour to dissipate heat. The device’s thermal shutdown activates at approximately 150°C, but sustained operation near this limit may degrade performance over time.

商家经验真实案例 · 安全可信
国产芯片应用设备
国产芯片已广泛应用于消费电子、工业自动化、汽车电子、通信设备和医疗设备等领域,展现了在性能与可靠性方面的进步。

B2B Procurement Guide

When sourcing the TLV70518PYFPR, verify authenticity by purchasing from authorized distributors like Digi-Key or Mouser. Volume discounts typically apply for orders exceeding 1,000 units, with lead times varying by supplier. Evaluate alternative part numbers (e.g., TLV703 for adjustable output) if flexibility is needed. For prototype quantities, sample kits from Texas Instruments may be available. Check for compliance with RoHS and REACH standards if exporting to regulated markets.

Related Manufacturers