Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLV431ACDBVR

Updated: 2026-07-29

Overview

The TLV431ACDBVR is a low-voltage, precision adjustable shunt regulator from Texas Instruments. It is designed to provide a stable reference voltage in various electronic circuits, with an adjustable output range typically from 1.24V to 6V. The device comes in a small SOT-23 package, making it suitable for space-constrained applications. As a shunt regulator, the TLV431ACDBVR operates by maintaining a constant voltage across its terminals by shunting excess current to ground. This makes it particularly useful in voltage regulation, power management, and reference voltage applications across various industries including consumer electronics, automotive, and industrial systems.

Structure and Working Principle

TLV431ACDBVR 电压基准IC TI/德州仪器 输入电压 静态功耗深圳市龙宏电子科技有限公司

The TLV431ACDBVR consists of a reference amplifier, output transistor, and precision voltage reference. The internal circuitry compares the reference voltage with an external voltage divider network to regulate the output. When the voltage at the reference pin exceeds the internal reference voltage, the device conducts more current to maintain regulation. The working principle is based on the shunt regulation technique, where the device maintains a constant voltage by varying its impedance. This allows it to compensate for changes in input voltage or load current, providing stable output even under varying conditions. The adjustable output voltage is set using two external resistors connected in a voltage divider configuration.

商家经验真实案例 · 安全可信
mos管放电二极管型号
本文解析MOS管放电二极管的常见型号及其应用场景,帮助工程师快速选型,同时探讨其工作原理与电路设计中的注意事项。

Key Features

The TLV431ACDBVR offers several notable features including a low minimum operating voltage of 1.24V, making it suitable for low-voltage applications. It provides high accuracy with a typical reference voltage tolerance of ±0.5% and low output noise, which is critical for precision applications. Additional features include low operating current (typically 80µA), wide operating temperature range (-40°C to +125°C), and excellent temperature stability. The device is also available in various package options to accommodate different PCB layout requirements, with the DBV (SOT-23) package being particularly popular for its small footprint.

Application Areas

The TLV431ACDBVR finds applications in numerous electronic systems requiring precise voltage references or regulation. Common uses include power supply feedback circuits, battery-powered devices, and portable electronics where low voltage operation is essential. In industrial applications, it's used in measurement equipment, process control systems, and instrumentation. The automotive sector utilizes these regulators in infotainment systems, lighting controls, and various sensor interfaces. Consumer electronics applications include smartphones, tablets, and digital cameras where space and power efficiency are critical factors.

Maintenance and Precautions

集成电路IC TLV431ACDBVR TI(德州仪器) SOT-23-5 电压基准芯片 原装深圳市金华洋世纪科技有限公司

When using the TLV431ACDBVR, it's important to observe several precautions to ensure reliable operation. The device should not be subjected to voltages or currents exceeding its maximum ratings, and proper heat dissipation should be considered in high-current applications. Care should be taken with PCB layout to minimize noise and ensure stability, particularly keeping the reference pin connections short. The external resistor divider network should be selected to provide adequate bias current while minimizing power consumption. For long-term reliability, operating within the specified temperature range and avoiding moisture exposure are recommended.

商家经验真实案例 · 安全可信
中山台光电子好做吗
本文从行业特点、企业运营和市场前景三个维度,客观分析电子制造行业的现状与挑战,为相关从业者提供参考视角。

B2B Procurement Guide

For B2B buyers, the TLV431ACDBVR is typically available through authorized distributors of Texas Instruments. Volume pricing is available for large orders, with price breaks commonly starting at quantities of 1,000 units. Lead times can vary depending on market demand, typically ranging from 4-12 weeks. When procuring, verify the exact part number including package designation (DBVR for SOT-23-5) and tape/reel specifications if required for automated assembly. Consider requesting samples for prototype testing before large-scale purchases. For critical applications, purchasing from authorized sources is recommended to ensure authenticity and quality assurance.

Related Manufacturers