Aicaigou LogoB2B WikiIndustrial Encyclopedia

TLV1701AIDBVR

Updated: 2026-07-15

Overview

The TLV1701AIDBVR is a single-channel operational amplifier (op-amp) from Texas Instruments, part of the TLV170x family. It is designed for low-power, high-precision applications, offering rail-to-rail output and a wide supply voltage range (1.8V to 5.5V). This makes it suitable for battery-powered devices and industrial systems where power efficiency and accuracy are critical. The op-amp features a low input offset voltage and low quiescent current, ensuring minimal signal distortion and extended battery life. Its small SOT-23-5 package makes it ideal for space-constrained applications. The TLV1701AIDBVR is widely used in sensor interfaces, audio amplification, and control systems.

Structure and Working Principle

TLV1701AIDBVR TI/德州仪器 运算SOT-23-5 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

The TLV1701AIDBVR consists of a differential input stage, gain stage, and output stage. The differential input stage amplifies the voltage difference between the inverting and non-inverting inputs. The gain stage further amplifies this signal, while the output stage provides rail-to-rail swing capability, ensuring maximum dynamic range. The op-amp operates on a single or dual power supply, with a typical quiescent current of 25µA. Its internal architecture includes compensation circuitry to ensure stability under various load conditions. The device also features built-in electrostatic discharge (ESD) protection, enhancing reliability in harsh environments.

商家经验真实案例 · 安全可信
IAKCK芯片全解析
本文深入探讨IAKCK芯片的基本特性、应用场景以及各引脚功能,帮助读者全面了解这款芯片的核心技术特点和实际应用价值。

Key Features

The TLV1701AIDBVR offers several standout features, including a low input offset voltage (typically 0.5mV) and low noise (25nV/√Hz). These characteristics make it suitable for precision applications such as medical devices and instrumentation. Additionally, the op-amp supports rail-to-rail output, enabling full utilization of the supply voltage range. Its wide temperature range (-40°C to 125°C) ensures reliable operation in industrial settings. The device also has a high common-mode rejection ratio (CMRR), minimizing interference from external noise sources.

Application Areas

The TLV1701AIDBVR is versatile, finding use in diverse fields. In industrial automation, it is employed for signal conditioning in sensors and transducers. Its low power consumption makes it ideal for portable medical devices like glucose meters and hearing aids. Consumer electronics also benefit from this op-amp, particularly in audio amplifiers and touchscreen controllers. Its precision and stability are valuable in automotive systems, such as battery management and infotainment systems. The device's robustness ensures performance in challenging environments.

Maintenance and Precautions

TLV1701AIDBVR 通用比较器 SOT-23-5 增益带宽积 静态电流IQ深圳市卓芯电子有限公司

To ensure optimal performance, avoid exceeding the maximum supply voltage (5.5V) and input voltage range. Proper PCB layout is essential to minimize noise and thermal effects. Use decoupling capacitors near the power supply pins to enhance stability. For thermal management, ensure adequate ventilation or heat sinking in high-temperature applications. Avoid exposing the device to electrostatic discharge (ESD) during handling. Follow Texas Instruments' guidelines for storage and soldering to prevent damage to the semiconductor components.

商家经验真实案例 · 安全可信
路口闪光灯拍什么
本文解析路口闪光灯的主要功能和工作原理,包括交通违法抓拍、安全警示作用及特殊场景应用,帮助读者全面了解这一常见交通设施。

B2B Procurement Guide

When procuring the TLV1701AIDBVR, verify the supplier's authenticity to avoid counterfeit products. Texas Instruments' authorized distributors are recommended for reliable supply. Bulk purchases typically offer cost savings, with prices ranging from $0.50 to $1.50 per unit. Check for compliance with industry standards such as RoHS and REACH. Lead time and inventory availability should be confirmed, especially for large orders. Consider sample testing before full-scale procurement to ensure compatibility with your application.

Related Manufacturers