Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLP2361(TPL)

Updated: 2026-07-29

Overview

The TLP2361 is a high-speed photocoupler designed to provide electrical isolation between two circuits while transmitting signals. It integrates a GaAs infrared LED and a photodiode detector, ensuring minimal signal delay and high noise immunity. Widely used in industrial automation, communication systems, and power electronics, this component is valued for its reliability and performance. Manufactured by Toshiba and other leading semiconductor companies, the TLP2361 meets stringent industry standards for insulation and durability. Its compact design and low power consumption make it suitable for space-constrained applications, such as PLCs (Programmable Logic Controllers) and servo drives.

Structure and Working Principle

XM2S-0912 电子元器件 NA PDF 规格书 资料 数据手册深圳四点零电子有限公司

The TLP2361 consists of an infrared LED on the input side and a photodiode with a built-in amplifier on the output side. When an electrical signal is applied to the LED, it emits infrared light, which is detected by the photodiode and converted back into an electrical signal. This optoelectronic coupling ensures complete electrical isolation between input and output. The device operates at high speeds, with typical response times as low as 0.5 µs, making it suitable for high-frequency applications. The internal insulation barrier provides a withstand voltage of 5000 Vrms, ensuring safety in high-voltage environments. Its low forward current requirement (typically 5 mA) further enhances energy efficiency.

商家经验真实案例 · 安全可信
弯式连接器是什么
本文介绍弯式连接器的定义、特点及常见应用场景,帮助读者了解这种特殊设计的连接器在工业领域的实际用途和优势。

Key Features

The TLP2361 offers several advantages, including high-speed signal transmission, excellent noise immunity, and robust isolation. Its GaAs IRED ensures stable light output, while the photodiode detector provides precise signal conversion. The component is resistant to external electromagnetic interference, making it ideal for noisy industrial environments. Additional features include a wide operating temperature range (-40°C to +110°C) and compliance with international safety standards such as UL, CSA, and VDE. These attributes make the TLP2361 a versatile choice for applications requiring reliable signal isolation and fast response times.

Application Areas

The TLP2361 is commonly used in industrial automation systems, such as PLCs, motor drives, and robotic controls, where signal isolation is critical for safety and performance. It is also employed in communication equipment, including modems and network switches, to prevent ground loops and reduce noise. In power electronics, the photocoupler is utilized in inverters, power supplies, and battery management systems to isolate control signals from high-voltage circuits. Its high-speed performance makes it suitable for digital interfaces, such as I2C and SPI, in microcontroller-based systems.

Maintenance and Precautions

TLP2361 TPL E T TOSHIBA 东芝 逻辑输出光耦 3.75kV东莞市鑫沐电子有限公司

To ensure optimal performance, avoid exceeding the maximum ratings for input current (typically 25 mA) and storage temperature. Proper soldering techniques should be followed to prevent thermal damage, with recommended soldering temperatures below 260°C for no more than 10 seconds. Storage conditions should be dry and free from corrosive gases, with humidity levels below 70% RH. Regular inspection for physical damage or discoloration is advised, especially in high-vibration environments. Always refer to the manufacturer’s datasheet for specific handling guidelines.

商家经验真实案例 · 安全可信
连接器电弧测试
本文解析连接器电弧测试的关键考量,包括测试原理、常见失效模式及提升耐电弧性能的实用方法,帮助工程师优化连接器设计。

B2B Procurement Guide

When sourcing TLP2361 photocouplers, prioritize suppliers with proven certifications, such as ISO 9001 or ISO/TS 16949, to ensure quality and reliability. Bulk purchases (e.g., reels of 1,000 units) often yield cost savings, with prices ranging from $1.50 to $3.00 per unit depending on volume. Verify compatibility with your application’s voltage and speed requirements, and confirm lead times to avoid production delays. Some manufacturers offer custom packaging or testing options for large orders. Always request samples for initial testing before committing to large-scale procurement.

Related Manufacturers