Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLE4966-3K

Updated: 2026-08-02

Overview

The TLE4966-3K is a Hall-effect sensor developed for precision magnetic field detection in demanding environments. It is widely used in automotive and industrial applications due to its reliability and energy efficiency. Manufactured with advanced semiconductor technology, this sensor provides accurate and stable performance even under extreme conditions, making it suitable for critical systems like braking and engine control.

Structure and Working Principle

ADXL326BCPZ 振动、接近、位移传感器 Analog Devices 封装- 批次新批次深圳市恒意法电子有限公司

The TLE4966-3K consists of a Hall-effect element, signal conditioning circuitry, and an output driver. It operates by detecting changes in magnetic fields and converting them into electrical signals. When exposed to a magnetic field, the Hall element generates a voltage proportional to the field strength. This voltage is processed by the internal circuitry to produce a clean, usable output signal, either digital or analog, depending on the variant.

商家经验真实案例 · 安全可信
4056与电池管理芯片配合
本文解析4056芯片如何与电池管理芯片协同工作,包括充电控制、电压调节和系统保护等关键功能,帮助理解两者在电路设计中的互补关系。

Key Features

The TLE4966-3K boasts high sensitivity and low power consumption, typically drawing less than 10mA during operation. Its robust design ensures resistance to vibration and mechanical stress. Additional features include reverse polarity protection and a wide operating temperature range (-40°C to 150°C), making it ideal for harsh environments like automotive underhood applications.

Application Areas

This sensor is extensively used in automotive systems for gear position detection, pedal position sensing, and throttle control. It also finds applications in industrial automation for speed measurement and proximity sensing. In consumer electronics, it can be used in devices requiring non-contact switching, such as laptops and household appliances.

Maintenance and Precautions

TLE4966-3K INFINEON/英飞凌 SOT-23UPS芯片 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

To ensure longevity, avoid exposing the TLE4966-3K to strong electromagnetic fields or voltages beyond its specified range. Proper PCB layout and grounding are essential to minimize noise interference. Regular calibration checks are recommended for critical applications to maintain accuracy over time. Storage in a dry, static-free environment is advised when not in use.

商家经验真实案例 · 安全可信
电池保护器B/B-连接指南
本文解析电池充放电保护器中B+和B-端子的正确连接方式,说明其与电池组、负载及保护电路的逻辑关系,并提醒常见接线错误与安全注意事项。

B2B Procurement Guide

When sourcing the TLE4966-3K, verify the supplier's certification and product traceability to ensure authenticity. Bulk purchases typically offer cost savings, with MOQs starting at 1,000 units. Consider lead times, which commonly range from 4-8 weeks for large orders. Request samples for testing compatibility with your application before committing to volume purchases.

Related Manufacturers