Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLE4295

Updated: 2026-08-10

Overview

The TLE4295 is a low-dropout (LDO) voltage regulator manufactured by Infineon Technologies, designed primarily for automotive and industrial applications. It provides a stable output voltage even when the input voltage is only slightly higher than the desired output, making it energy-efficient. This regulator is known for its high accuracy (±2% output voltage tolerance) and low quiescent current (typically 40 µA), which helps reduce power consumption in battery-operated systems. The device typically comes in a PG-TO252-3 package and operates over a wide temperature range (-40°C to +150°C).

Structure and Working Principle

TLE4295G V50 INFINEON/英飞凌 集成IC 封装SCT-595-5 批次22+深圳市创芯联盈电子有限公司

The TLE4295 consists of a reference voltage source, error amplifier, pass transistor, and protection circuits. The error amplifier compares the output voltage (via a feedback network) with the internal reference and adjusts the pass transistor to maintain constant output. Key components include over-temperature protection (shuts down at ~160°C) and short-circuit protection. The device requires only input and output capacitors for stable operation, simplifying circuit design. The dropout voltage (difference between input and output) is typically 300 mV at 150 mA load current.

商家经验真实案例 · 安全可信
550整流器更换指南
本文为您提供550整流器更换的详细指南,包括常见更换地点、注意事项以及如何选择合适的维修服务,帮助您轻松解决整流器更换问题。

Key Features

The TLE4295 offers several advantages for power management: very low dropout voltage enables operation with small voltage margins, while the low quiescent current minimizes power loss in standby modes. Additional features include excellent line and load regulation (±0.05%/V and ±0.5% typical respectively), fast transient response, and reverse polarity protection. The device is qualified according to AEC-Q100 for automotive applications, ensuring reliability in harsh environments with temperature fluctuations and vibrations.

Application Areas

Primary applications include automotive electronics such as engine control units, infotainment systems, and body controllers where stable voltage is critical despite fluctuating battery voltage (6V-18V nominal, with surges up to 45V). In industrial settings, the TLE4295 is used in PLCs, sensors, and control systems. Its robustness makes it suitable for applications requiring reliable operation under wide temperature variations and electrical noise. The regulator is particularly valued in systems where power efficiency and small footprint are priorities.

Maintenance and Precautions

TLE4295GV33HTSA1 TLE4295 INFINEON/英飞凌 PG-SCT595- 集成电路深圳市芯齐壹科技有限公司

Proper heatsinking is recommended when operating near maximum current (500 mA) or at high ambient temperatures. The thermal resistance junction-to-ambient is approximately 75 K/W in standard conditions. Designers should ensure input voltage never exceeds the absolute maximum rating (45V) and that input/output capacitors meet specifications (typically 1 µF ceramic). PCB layout should minimize trace resistance between the regulator and load to maintain regulation accuracy. For automotive applications, additional protection against load dump transients may be necessary.

商家经验真实案例 · 安全可信
半自动合成器直营店
本文探讨半自动合成器直营店的核心优势、选购要点及使用场景,帮助用户了解这类专业设备的应用价值与选择技巧。

B2B Procurement Guide

When sourcing TLE4295 regulators, verify the supplier's authorization status with Infineon to avoid counterfeit products. Common packaging options include tape-and-reel for automated assembly, with MOQs typically starting at 1,000 pieces. Lead times vary from stock availability to 8-12 weeks for large orders. Consider requesting samples for testing before volume purchases. Pricing tiers generally decrease at quantity breaks of 1k, 5k, and 25k units. Some distributors offer value-added services like programming or kitting for automotive module manufacturers.

Related Manufacturers