Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TLE42664GHTMA2

Updated: 2026-07-21

Overview

The TLE42664GHTMA2 is a low-dropout (LDO) voltage regulator manufactured by Infineon Technologies, designed for demanding automotive and industrial applications. It provides a stable output voltage with high accuracy, making it suitable for powering microcontrollers, sensors, and other critical components. The device operates with a low quiescent current, enhancing energy efficiency in battery-powered systems. This LDO is part of Infineon's automotive-grade product lineup, meeting stringent quality and reliability standards. It features robust protection mechanisms, including over-temperature and short-circuit protection, ensuring safe operation in harsh environments. The TLE42664GHTMA2 is available in a compact package, making it ideal for space-constrained applications.

Structure and Working Principle

ADT7410TRZ ADI亚德诺 新批次 8-SOIC0.154,3.90mm 宽 集成电路IC芯片深圳市芯琰半导体有限公司

The TLE42664GHTMA2 consists of a voltage reference, error amplifier, pass transistor, and protection circuits. The error amplifier compares the output voltage with a reference voltage, adjusting the pass transistor to maintain a stable output. The low-dropout design allows the regulator to function even when the input voltage is only slightly higher than the output voltage. The device includes built-in protection features such as thermal shutdown and current limiting. These safeguards prevent damage from excessive heat or short circuits, enhancing reliability. The TLE42664GHTMA2 also incorporates a enable pin, allowing for power management by turning the regulator on or off as needed.

商家经验真实案例 · 安全可信
ad7708输入阻抗解析
本文详细解析AD7708芯片的模拟量输入阻抗特性,包括典型值范围、实际应用场景中的影响因素,以及与其他关键参数的协同关系,帮助工程师合理设计信号采集电路。

Key Features

The TLE42664GHTMA2 offers several key features, including a low dropout voltage, typically around 300 mV at full load. This minimizes power loss and improves efficiency. The regulator provides a high-accuracy output voltage with a tolerance of ±2%, ensuring precise power delivery to sensitive components. With a quiescent current of just 40 µA, the TLE42664GHTMA2 is ideal for battery-operated systems where power conservation is critical. The device also supports a wide input voltage range, typically from 3.0 V to 40 V, making it versatile for various applications. Its robust design includes reverse polarity protection and load dump resilience, catering to automotive requirements.

Application Areas

The TLE42664GHTMA2 is widely used in automotive systems, such as engine control units (ECUs), infotainment systems, and advanced driver-assistance systems (ADAS). Its reliability and protection features make it suitable for harsh automotive environments, including under-the-hood applications. In industrial settings, the regulator is employed in power supplies, factory automation equipment, and instrumentation. Its low quiescent current and high accuracy are beneficial for portable and battery-powered devices. The TLE42664GHTMA2 is also used in consumer electronics, medical devices, and telecommunications infrastructure, where stable voltage regulation is essential.

Maintenance and Precautions

TLE42664GHTMA2 电子元器件 Infineon 封装5 V 批次新批次深圳市恒意法电子有限公司

To ensure optimal performance, the TLE42664GHTMA2 should be used within its specified operating conditions. Proper heat dissipation is critical, especially in high-current applications. A heatsink or adequate PCB copper area may be required to manage thermal loads. Avoid exceeding the maximum input voltage to prevent damage to the device. Ensure that the enable pin is correctly connected to avoid unintended shutdowns. Regularly inspect the system for signs of overheating or voltage instability, and replace the regulator if performance degrades. Following these precautions will extend the lifespan of the TLE42664GHTMA2 and maintain system reliability.

商家经验真实案例 · 安全可信
ad8610和lme49710哪个好
本文比较了ad8610和lme49710两款运算放大器的关键性能指标,包括噪声水平、带宽和功耗等,帮助工程师根据具体应用场景选择合适的器件。

B2B Procurement Guide

When procuring the TLE42664GHTMA2, verify the required specifications, such as output voltage, current capacity, and package type. Bulk purchases often qualify for discounts, so consider volume requirements to optimize costs. Ensure the supplier provides genuine Infineon products to avoid counterfeit components. Lead times can vary, especially for automotive-grade parts, so plan procurement accordingly. Evaluate suppliers based on reliability, certification, and after-sales support. Request samples for testing before large-scale deployment to confirm compatibility with your application. Proper procurement planning ensures a steady supply of high-quality components.

Related Manufacturers