Aicaigou LogoB2B WikiIndustrial Encyclopedia

TL431AIDBZR

Updated: 2026-07-15

Overview

The TL431AIDBZR is a three-terminal adjustable precision shunt regulator, widely used in power supply circuits for voltage regulation and reference applications. It is part of the TL431 family, known for its reliability and versatility in both industrial and consumer electronics. This device operates by comparing an internal reference voltage with an external voltage divider, allowing precise control of output voltage. Its compact SOT-23 package makes it suitable for space-constrained designs, while its performance meets stringent requirements for accuracy and stability.

Structure and Working Principle

云汉芯城TEXAS INSTRUMENTS集成电路(IC)ATL431AIDBZR元器件商城上海云汉天启电子科技有限公司

The TL431AIDBZR consists of a reference amplifier, output transistor, and precision voltage reference. The internal circuitry compares the input voltage at the REF pin with a fixed 2.5V reference. Based on this comparison, the device adjusts its output to maintain a stable voltage. When the REF pin voltage exceeds 2.5V, the output transistor conducts, shunting current to ground. This feedback mechanism enables precise voltage regulation. The device can be configured as a shunt regulator, error amplifier, or voltage monitor, depending on the circuit design.

商家经验真实案例 · 安全可信
TDA7292音频芯片解析
本文深入解析TDA7292音频功放芯片的性能定位、技术特点及适用场景,帮助读者全面了解这款经典芯片在音响领域中的实际表现与应用价值。

Key Features

The TL431AIDBZR offers adjustable output voltage from 2.5V to 36V, making it adaptable to diverse applications. Its low dynamic impedance (typically 0.2Ω) ensures stable performance under varying load conditions. Other notable features include a wide operating temperature range (-40°C to +125°C) and low output noise. The device's high accuracy (±1% reference voltage tolerance) and low thermal drift make it ideal for precision circuits. Its SOT-23 package provides a compact footprint for modern electronics.

Application Areas

Common applications include switch-mode power supplies (SMPS), where the TL431AIDBZR provides feedback voltage regulation. It is also used in battery chargers, LED drivers, and voltage monitors. In industrial settings, the device serves in programmable logic controllers (PLCs) and instrumentation circuits. Consumer electronics like TVs, routers, and adapters frequently incorporate this component for its reliability and cost-effectiveness. Its versatility extends to automotive systems, where stable voltage references are critical.

Maintenance and Precautions

TL431AIDBZR 电压基准IC TI 封装SOT23-3 批次22+雅创芯城(深圳)供应链有限公司

To ensure longevity, avoid exceeding the device's maximum ratings: 36V cathode-to-anode voltage and 100mA cathode current. Proper PCB layout is essential to minimize noise and thermal stress. Heat dissipation should be considered in high-current applications. The SOT-23 package has limited thermal mass, so additional cooling may be required for continuous operation near maximum ratings. Always follow ESD precautions during handling to prevent damage to the semiconductor junctions.

商家经验真实案例 · 安全可信
STM32F429 vs F407:谁更胜一筹
本文对比STM32F429与STM32F407的硬件差异,从屏幕支持、内存容量到外设接口,解析两者性能特点,助你根据需求选择理想方案。

B2B Procurement Guide

When procuring TL431AIDBZR in bulk, verify manufacturer authenticity to avoid counterfeit components. Key suppliers include Texas Instruments (original designer), ON Semiconductor, and other licensed producers. Consider lead time, packaging (tape and reel for automated assembly), and temperature grade options. For cost-sensitive projects, compare prices across distributors but prioritize traceability. Minimum order quantities (MOQs) typically start at 1,000 units, with discounts available for larger volumes.

Related Manufacturers