Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Tire Pyrolysis

Updated: 2026-07-22

Overview

Tire pyrolysis oil is a hydrocarbon mixture produced through the thermal decomposition of waste tires in an oxygen-free environment. This process, called pyrolysis, breaks down the complex rubber polymers into smaller molecules, yielding oil as one of the principal products. The oil typically constitutes 35-45% of the output from tire pyrolysis, alongside carbon black (30-35%) and steel (10-15%). As a waste-to-energy product, it offers an alternative to conventional fossil fuels while addressing the growing challenge of tire disposal. The quality and composition vary depending on the pyrolysis process parameters and tire feedstock.

Physical and Chemical Properties

橡胶轮胎隔离剂胶片防粘剂不影响后期加工混炼脱模剂抗粘黏剂绿联(济宁)化学科技有限公司

Tire pyrolysis oil is characterized by its high energy content, with a calorific value typically ranging between 38-42 MJ/kg, comparable to diesel fuel. The viscosity ranges from 5-25 cSt at 40°C, and it has a flash point between 50-80°C, classifying it as a flammable liquid. Chemically, it contains a complex mixture of aliphatic and aromatic hydrocarbons, with a significant sulfur content (1-2%) due to the vulcanization process used in tire manufacturing. The oil also contains various additives originally present in tires, which can affect its stability and combustion properties.

商家经验真实案例 · 安全可信
废机油能替代齿轮油吗
本文探讨废机油是否适合作为齿轮油使用,分析其潜在风险和性能差异,帮助读者理解为何专业润滑场合必须使用专用油品,避免设备损坏。

Main Applications

The primary use of tire pyrolysis oil is as a heavy fuel oil substitute in industrial burners, cement kilns, and boiler systems. Its high calorific value makes it suitable for energy-intensive processes where sulfur emissions can be managed. After further refining, it can serve as a feedstock for producing diesel-like fuels or as a source of aromatic compounds for chemical synthesis. Some facilities blend it with conventional fuels to reduce costs, though this requires careful consideration of environmental regulations and equipment compatibility.

Safety and Storage

密炼机油 注塑机关节润滑油 重负荷工业齿轮油 轮胎厂用油 橡胶填充油江西巴格润滑科技有限公司

As a flammable material with potential health hazards, tire pyrolysis oil requires proper handling and storage. Containers should be clearly labeled and stored in well-ventilated areas away from ignition sources. Secondary containment is recommended to prevent environmental contamination in case of leaks. Personnel handling the oil should use appropriate PPE, including chemical-resistant gloves and eye protection. Due to the variable composition between batches, material compatibility with storage tanks and transfer systems should be verified. Regular monitoring for degradation products is advised for long-term storage.

商家经验真实案例 · 安全可信
农田重金属污染植物修复技术
本文介绍农田重金属污染的植物修复技术,包括超积累植物的选择、修复机制及实际应用效果,帮助理解这一环保修复方法的核心原理。

B2B Procurement Guide

When sourcing tire pyrolysis oil, buyers should establish clear quality specifications including calorific value, sulfur content, water content, and ash content. Request certificates of analysis for each batch and consider third-party testing for critical applications. Evaluate suppliers based on their pyrolysis process controls and consistency of output. Establish long-term contracts to secure supply stability, but include quality assurance clauses. Transportation logistics are crucial due to the oil's classification as a hazardous material in many jurisdictions.

Related Manufacturers