Overview
TIM New Materials is a leading developer of advanced thermal interface materials (TIMs) and specialty chemical solutions. Founded to address heat dissipation challenges in high-tech industries, its products bridge gaps between heat-generating components and heat sinks. The company’s R&D focuses on polymer composites, ceramics, and nano-engineered coatings. TIM’s product portfolio includes thermally conductive adhesives, gap fillers, and phase-change materials. These are critical in applications requiring precise thermal management, such as LED lighting, electric vehicle batteries, and 5G infrastructure. The materials are designed to balance performance with manufacturability, offering OEMs scalable solutions.
Physical and Chemical Properties
TIM materials exhibit high thermal conductivity (1–12 W/mK), low thermal resistance, and stability across temperatures ranging from -50°C to 200°C. Their dielectric strength exceeds 10 kV/mm, making them suitable for electronics. Viscosity and cure times vary by product type, with some formulations offering reworkability. Chemically, these materials are often silicone- or acrylic-based, with fillers like boron nitride or aluminum oxide. They resist oxidation and moisture absorption, ensuring long-term reliability. Mechanical properties include flexibility (for stress relief) and adhesion strengths of 1–5 MPa, depending on substrate compatibility.
Main Applications
In electronics, TIM materials are applied in CPUs, GPUs, and power modules to prevent overheating. Automotive uses include battery thermal management in EVs and inverter cooling. Aerospace applications leverage their lightweight properties for satellite components. Industrial equipment relies on TIM coatings to protect sensors and motors. The materials also enable energy-efficient designs in consumer electronics, such as smartphones and laptops, by minimizing heat-related throttling. Custom formulations address niche needs like EMI shielding or vibration damping.
Safety and Storage
Most TIM products are RoHS and REACH compliant, with low VOC emissions. Standard PPE (gloves, goggles) is recommended during handling to prevent skin irritation. Uncured adhesives require ventilation due to mild solvent content. Storage conditions typically mandate temperatures below 30°C and humidity under 60%. Shelf life ranges from 6–24 months; freezing may extend it for certain pastes. Bulk purchases should prioritize airtight containers to prevent drying or contamination.
B2B Procurement Guide
Procurement should begin with a thermal analysis to determine conductivity and thickness requirements. Volume discounts apply at 100+ kg orders, with lead times of 2–6 weeks for custom grades. Samples are often available for testing. Key suppliers include authorized distributors in Asia, Europe, and North America. Certifications like UL and ISO 9001 indicate quality compliance. Buyers should verify batch consistency and request technical datasheets for ASTM/ISO performance metrics.
Related Manufacturers
- 主营：金颗粒、银颗粒、铬颗粒、蒂姆新材料、晶振片、单晶硅片、溅射靶材、中间合金、合金熔炼、电镜靶材、金靶材、AZO靶材、棒材、箔片、键合金丝、坩埚、镍块、钒靶材、台阶靶材、合金靶材、金属箔片、蒸发耗材、常规金属靶材
- 主营：新材料、硫酸钐
- 主营：新材料、改性塑料、增强尼龙、尼龙双6塑料
- 主营：氟化铝、发酵粉、缓冲液、新材料、钼酸铵、分析试剂、研究试剂、碳酸氢铵、磷酸一铵、防水织物、聚丙烯酰胺、聚合催化剂、三氧化二锑、对甲苯磺酸、纸的柔软剂、氮磷复合肥料、粉末涂料固化剂、对三氟甲基苯腈
- 主营：杜仲素、对位酯、丙烯酸酯、新材料、二氧化硫脲、乙基麦芽酚、饲料添加剂、油酸基硬脂酸、二苯基硅二醇
- 主营：运动地坪、硅pu球场材料、塑胶跑道、新材料、丙烯酸球场材料、epdm橡胶颗粒、人造草坪、足球场草坪、PVC运动地胶、悬浮地板、新国标环保地坪、体育运动球场跑道