Aicaigou LogoB2B Wiki

Thermal Insulation Thick-layer Putty

Updated: 2026-08-05

Overview

Thick-layer Thermal Insulation Putty is a specialized construction material primarily used for thermal insulation and surface preparation in building applications. Composed of lightweight fillers, binders, and additives, this material combines the functions of insulation and surface leveling in one product. It is particularly valuable in energy-efficient construction where reducing thermal bridges is crucial. Unlike conventional putties, this material can be applied in thicker layers (typically 10-30mm) without cracking, thanks to its unique formulation with expanded perlite, vermiculite, or other insulating aggregates. The product has gained popularity in green building projects and retrofit applications where improving thermal performance is a priority.

Physical and Chemical Properties

The putty exhibits low thermal conductivity, typically in the range of 0.06-0.12 W/(m·K), making it effective for insulation purposes. Its density is significantly lower than conventional cement-based products, reducing structural load while maintaining adequate mechanical strength. The material shows excellent adhesion to various substrates including concrete, brick, and existing plaster surfaces. Chemically, the putty is alkaline (pH 10-12 when fresh) but becomes neutral after complete curing. It demonstrates good resistance to mold growth and maintains stability within temperature ranges common in building applications (-40°C to +80°C). The water absorption rate is controlled to prevent moisture damage while allowing adequate vapor permeability.

Main Applications

The primary application is in building envelope insulation, particularly for walls where conventional insulation materials might be impractical. It serves as both an insulating layer and finishing surface preparation in one operation. The putty is commonly used in energy retrofit projects to improve thermal performance of existing buildings without significant structural modifications. Specialized applications include thermal bridge correction at building junctions, window reveals, and other architectural details. Some formulations are suitable for exterior use when protected by appropriate coatings. In industrial settings, it may be applied to equipment enclosures where moderate thermal protection is needed.

Safety and Storage

While generally safe, the dry powder form can generate dust during handling, requiring appropriate respiratory protection. Skin contact with uncured material should be minimized as the alkaline nature may cause irritation. Proper ventilation is recommended during application until the material is fully cured. Storage requires protection from moisture and extreme temperatures. Unopened bags typically have a shelf life of 6-12 months when stored properly. Once mixed with water, the working time is usually 2-4 hours depending on ambient conditions. Cured material is non-toxic and emits no volatile organic compounds.

B2B Procurement Guide

When sourcing thick-layer insulation putty, prioritize suppliers with documented quality control processes and relevant industry certifications. Key specifications to verify include thermal conductivity (λ-value), compressive strength, and adhesion values. For large projects, request product samples and conduct small-scale tests before full procurement. Consider logistics factors as the material's bulk density affects transportation costs. Many manufacturers offer technical support for proper application, which can be valuable for complex projects. Payment terms for bulk purchases often include discounts for full container loads or project-scale quantities.

Related Manufacturers