Overview
Tertiary amine accelerators are organic compounds featuring a nitrogen atom bonded to three alkyl or aryl groups. They serve as efficient catalysts in polymerization reactions, notably in polyurethane (PU) and epoxy systems. Their role is to lower activation energy, accelerating curing without being consumed in the process. These accelerators are favored for their versatility and ability to tailor reaction speeds. They are classified by their activity (e.g., low, medium, high) and are selected based on application requirements, such as gel time or foam density in PU production.
Physical and Chemical Properties
Tertiary amine accelerators are typically low-viscosity liquids with mild ammoniacal odors. Their solubility in polar solvents like water or alcohols varies by structure, with hydrophobic variants preferred in moisture-sensitive formulations. Key chemical properties include basicity (pKa ~9–11) and thermal stability up to 200°C. Some derivatives exhibit low volatility (e.g., dimethylcyclohexylamine), reducing workplace exposure risks. Density and boiling points correlate with molecular weight, influencing handling and storage protocols.
Main Applications
In polyurethane foams, tertiary amines balance blowing and gelling reactions, critical for uniform cell structure. Flexible foams use catalysts like triethylenediamine (TEDA), while rigid foams employ pentamethyldiethylenetriamine (PMDETA). Epoxy systems rely on accelerators like benzyldimethylamine (BDMA) for cold-cure applications. Adhesives and coatings benefit from tailored latency, ensuring workability before rapid curing. Niche uses include elastomers and composite materials.
Safety and Storage
Tertiary amines are corrosive and may cause respiratory or dermal irritation. OSHA mandates exposure limits (e.g., 5–10 ppm for common variants). Storage requires inert containers (HDPE or stainless steel) away from oxidizers. Spill management involves neutralization with weak acids (e.g., acetic acid) and absorption via inert materials. Disposal must comply with local regulations, often as hazardous waste.
B2B Procurement Guide
Procure accelerators based on technical specifications: activity level, compatibility with other formulation components, and regulatory compliance (e.g., REACH, FDA for food-contact materials). Request SDS and batch certificates to validate purity (>98% typical). Bulk buyers should negotiate pricing for drums (200 kg) or isotanks, with lead times of 2–4 weeks. Preferred suppliers include BASF, Evonik, and Huntsman.
Related Manufacturers
- 主营：LC5.0型轻集料、LC7.5型轻集料、轻集料混凝土、促进剂、轻骨料混凝土、玻璃鳞片胶泥、环氧富锌底漆、氰凝防水防腐涂料、环氧防腐涂料、8710饮用级防腐涂、聚氨酯防腐涂料
- 主营：三乙胺、均三甲苯、月桂酸、促进剂、磷酸三甲酯、尿素、三乙二醇、丙二醇甲醚、乙二醇丁醚、硫酸亚铁、柠檬酸钠、氢氧化钠、乙醇、苯酚、次氯酸钠、亚硫酸氢钠、正辛醇、白油、溶剂油
- 主营：促进剂、偶联剂、油漆涂料、生产用助催化剂
- 主营：铜盐、锰盐、锡盐、促进剂、氧化亚镍、氧化钴、氢氧化钴、锆盐、无卤环保抑烟阻燃剂、无卤环保阻燃剂
- 主营：增塑剂、二甲基亚砜、顺酐、叔十二硫醇、环丁砜、二甲基二硫醚、赋臭剂、四氢噻吩加臭剂、环戊烷、塑化剂、二辛酯、石油醚、异丁醇、氯化苄、硬脂酸钙、树脂涂料、四氢噻吩、化学试剂、国标染料、氯乙酸、硬脂酸锌、乙二醛、异辛烷、橡胶塑料
- 主营：多聚甲醛、正硅酸乙酯28 40、正十二烷、促进剂、二甲苯、四氢呋喃、液体丁腈橡胶、乙二醛、四氯乙烯、三氯乙烯、环己酮、环己胺、二甲基甲酰胺、二甲基乙酰胺、航空煤油、石油醚、糠醛、亚氯酸钠、铬酸酐、顺酐、保险粉、无水乙醇、异丙醇、二氯甲烷、醋酸乙酯、醋酸甲酯
- 主营：苯甲醇、抗冻剂、丙三醇、橡胶促进剂、润滑剂、叶面肥、慢干溶剂、二甲基亚砜、二甲基乙酰胺、十二水硫酸铝钾
- 主营：涂料分散剂、流平剂、消泡剂、附着力促进剂、防涂鸦助剂、导电剂、手感剂、增硬耐磨剂、UV打印涂层液、UV玻璃涂层、UV金属涂层、UV PET涂层、UV塑料涂层
- 主营：120号溶剂油、150号溶剂油、200号溶剂油、甲基叔丁基醚、260号溶剂油、白油、D40溶剂油、D60溶剂油、D80溶剂油、D130溶剂油、磺化煤油、丙二醇、对甲苯磺酰氯、莫卡、聚乙二醇、二茂铁、石蜡、乙二醇、铝粉膏、抗氧剂T501、甲基丙烯酸缩水甘油酯、乙二醇丁醚、甲缩醛、石脑油、正十四烷
- 主营：低硅铁、硅钡孕育剂、硅钙粉、促进剂、硅钙块、硅钙粒、硅锰合金、硅铝钡、硅铁粒1-3mm、球化剂、硅铁粒3-5mm、硅铝钡钙、冶炼硅锰合金、铸造用硅钡孕育剂、硅铁粒、脱氧剂硅锰块、锰硅合金材料、冶金球化剂、72号硅铁粒、硅锰脱氧合金、硅铝钡钙合金、硅钙合金颗粒、硅钙合金块、高效硅钡孕育剂、低硅合金铁、硅铝钡精炼剂
- 主营：甲基丙烯酸十二酯、甲基丙烯酸十六酯、甲基丙烯酸十八酯、促进剂、丙烯酸十二酯、丙烯酸十六酯、丙烯酸十八酯、V50引发剂、偶氮二异丁咪唑啉盐酸盐、N-乙酰己内酰胺、硅烷偶联剂、双马来酰亚胺、马来酸酯、缩水甘油酯、缩水甘油醚、甲基咪唑、N-异丙基丙烯酰胺、金属萃取剂
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、30环氧促进剂、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、全氟三丁胺、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：降粘剂、地坪漆、消泡剂、附着力促进剂、流平剂、塑胶五金、五金工业、木器涂漆、铝粉排列剂、水性涂料定制
- 主营：合成树脂、固化剂、不饱和树脂、促进剂、环氧树脂、聚酯多元醇、酚醛树脂、医药中间体
- 主营：促进剂、孕育剂
- 主营：改进剂、氯化石蜡、四氢噻吩砜、橡胶促进剂、表面活性剂、柴油添加剂、防冻液原料、油墨稀释剂、二甲基甲酰胺、环氧脂肪酸甲酯、环氧甘油三酸酯