Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TCRT1000

Updated: 2026-08-04

Overview

The TCRT1000 is a widely used reflective optical sensor that combines an infrared emitter and phototransistor in a single package. Developed for cost-effective proximity and object detection, it's particularly popular in automation, robotics, and consumer electronics. The sensor's compact size (typically 10mm x 5mm x 7mm) and simple interface make it suitable for mass production applications. Unlike through-beam sensors requiring separate components, the TCRT1000's reflective design simplifies installation and reduces system complexity. Its typical detection range spans 0.2mm to 15mm, with performance varying based on surface reflectivity and environmental conditions. The sensor operates at low voltages (3-5V DC), making it compatible with most microcontroller systems.

Structure and Working Principle

TI LMK1C1104PWR LVCMOS BUFFER 4-CHANNEL深圳市金科世纪电子有限公司

The TCRT1000 consists of three main components: an infrared LED emitter, a silicon phototransistor receiver, and a molded plastic housing that optically separates them while maintaining precise alignment. The housing includes an infrared filter to reduce ambient light interference. When powered, the IR LED emits light that reflects off nearby objects and is detected by the phototransistor. The sensor's working principle relies on the intensity of reflected light. In the absence of a reflective surface, the phototransistor remains off (high resistance state). When an object enters the detection zone, reflected IR light triggers the phototransistor, causing its resistance to drop proportionally to the reflected light intensity. This change can be measured as either an analog voltage or converted to a digital signal through threshold comparison.

商家经验真实案例 · 安全可信
sdh150一37参数配置
本文深入解析sdh150一37设备的各项参数配置,包括其基本规格、性能特点以及适用场景,帮助用户全面了解该设备的实际应用价值。

Key Features

The TCRT1000 stands out for its high sensitivity to infrared wavelengths (typically 950nm), allowing reliable detection even of low-reflectivity surfaces. Its built-in daylight blocking filter significantly reduces false triggers from ambient light sources. The sensor's response time of about 10μs enables detection of fast-moving objects in industrial applications. Electrical characteristics include a forward voltage of 1.25V (typical) for the IR LED and collector-emitter saturation voltage below 0.4V for the phototransistor. The device operates across a temperature range of -25°C to +85°C, making it suitable for various environments. Its symmetrical design allows flexible mounting options, though optimal performance is achieved with the recommended 2-10mm gap between sensor and detection surface.

Application Areas

In industrial automation, TCRT1000 sensors are commonly used for object presence verification on assembly lines, paper feed detection in printers, and part counting systems. Their reliability and low cost make them ideal for high-volume manufacturing environments. Robotics applications include line-following vehicles, obstacle detection, and encoder wheel sensing. Consumer electronics utilize these sensors in appliances like paper towel dispensers, automatic soap dispensers, and tamper-proof mechanisms. Educational kits frequently incorporate TCRT1000 sensors due to their simplicity and effectiveness for teaching basic sensing principles. Emerging IoT applications include smart inventory tracking and low-power presence detection for energy-saving systems.

Maintenance and Precautions

CY8C4025AZI-S413T 电子元器件 Cypress(赛普拉斯) 封装TQFP-48(7x7) 批次新年份深圳市欧诺汇科技有限公司

Regular maintenance involves keeping the sensor lens clean from dust and contaminants that could scatter or absorb IR light. Isopropyl alcohol and lint-free wipes are recommended for cleaning. Avoid mechanical stress on the sensor leads, as the internal wire bonds are delicate. For optimal performance, recalibrate detection thresholds periodically, especially in environments with variable lighting conditions. Electrical protection is crucial - always use current-limiting resistors for the IR LED (typically 100Ω) and consider adding a pull-up resistor (10kΩ common) for the phototransistor output. Avoid exposing the sensor to strong RF fields or electrostatic discharge. When designing the detection circuit, account for potential interference from other IR sources in the environment by modulating the emitter signal and using synchronous detection where possible.

商家经验真实案例 · 安全可信
dh150es参数解析
本文详细解析dh150es的关键参数,包括其性能特点、适用场景及技术优势,帮助读者全面了解该设备的核心功能。

B2B Procurement Guide

When sourcing TCRT1000 sensors in bulk, verify the manufacturer's quality control processes, as performance can vary between suppliers. Key specifications to request include spectral response graphs, angular sensitivity profiles, and batch-to-b consistency data. Consider requesting samples for environmental testing under your specific application conditions. Lead times typically range from 4-8 weeks for large orders (10,000+ units), with MOQs varying by supplier. Many distributors offer tape-and-reel packaging for automated assembly. For critical applications, discuss extended temperature range options or customized detection distances. Price breaks usually occur at quantity tiers of 1,000, 5,000, and 10,000 units, with additional discounts possible for long-term contracts.

Related Manufacturers