Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

TCAN1051HDR

Updated: 2026-08-06

Overview

The TCAN1051HDR is a high-speed Controller Area Network (CAN) transceiver developed for industrial and automotive applications. It complies with ISO 11898-2 standards, ensuring reliable communication in noisy environments. This device is widely used in vehicle networks, industrial automation, and other systems requiring robust data transmission. The TCAN1051HDR supports data rates up to 5 Mbps, making it suitable for high-speed applications. Its integrated features, such as thermal shutdown and fail-safe operation, enhance system reliability. The transceiver is available in small-form-factor packages, facilitating easy integration into compact designs.

Structure and Working Principle

TCAN1051HDRQ1 集成电路(IC) TI 封装SOIC-8 批号22+深圳羚行科技有限公司

The TCAN1051HDR consists of a transmitter and receiver pair, along with protection circuits for ESD and voltage spikes. The transmitter converts digital signals from a CAN controller into differential signals for transmission over the CAN bus. The receiver, on the other hand, translates incoming differential signals back into digital format for the controller. A key component of its working principle is the bus fault protection mechanism, which safeguards the device from short circuits and overloads. The transceiver also includes a low-power standby mode, reducing energy consumption when the network is idle. These features ensure stable performance in demanding environments.

商家经验真实案例 · 安全可信
激光隔离器光斑过大处理
激光隔离器工作时出现光斑缩束过大的问题,可能由准直误差、元件污染或装配偏差引起。本文提供三步排查法:先检查准直镜组对焦,再清洁光学表面,最后校准机械同轴度,并建议周期性维护以保持设备稳定运行。

Key Features

The TCAN1051HDR offers several standout features, including high-speed data transmission up to 5 Mbps and robust ESD protection (up to ±8 kV). Its wide supply voltage range (4.5 V to 5.5 V) makes it versatile for various applications. The device also supports silent mode, allowing it to monitor the bus without transmitting data. Another notable feature is its thermal shutdown capability, which prevents damage from overheating. The transceiver's low electromagnetic emissions ensure compliance with automotive and industrial standards. These attributes make it a preferred choice for reliable communication in harsh conditions.

Application Areas

The TCAN1051HDR is extensively used in automotive systems, such as engine control units, infotainment systems, and advanced driver-assistance systems (ADAS). Its high-speed capabilities and robustness make it ideal for real-time communication in vehicles. In industrial settings, the transceiver is employed in automation systems, robotics, and machinery control. It ensures seamless data exchange between sensors, actuators, and controllers. Additionally, its reliability in noisy environments makes it suitable for medical equipment and aerospace applications where data integrity is critical.

Maintenance and Precautions

TCAN1051HDRQ1 集成电路(IC) TI/德州仪器 封装SOP-8 批次22+米德高斯大数据科技(上海)股份有限公司

To ensure optimal performance, the TCAN1051HDR should be installed with proper grounding to minimize noise interference. Avoid exposing the device to voltage spikes beyond its specified limits, as this can damage the internal circuitry. Regular inspection of the CAN bus for physical damage or loose connections is recommended. When designing the PCB layout, maintain adequate spacing between signal traces to reduce crosstalk. Use decoupling capacitors near the power supply pins to stabilize voltage levels. Following these precautions will extend the lifespan of the transceiver and maintain communication reliability.

商家经验真实案例 · 安全可信
mipsr4300i晶体管数量
本文探讨MIPS R4300i处理器的晶体管数量,分析其设计特点及在工业领域的应用价值,帮助读者理解这款经典处理器的技术细节。

B2B Procurement Guide

When procuring the TCAN1051HDR, verify that the supplier provides genuine components with traceable certifications, such as AEC-Q100 for automotive applications. Bulk purchases typically offer cost savings, with prices ranging approximately $1.50 to $3.00 per unit, depending on quantity and supplier. Check for compatibility with your existing CAN protocol and ensure the transceiver meets your system's voltage and speed requirements. Reliable suppliers often provide sample units for testing before large-scale orders. Additionally, inquire about lead times to avoid delays in production schedules.

Related Manufacturers