Overview
Tamper-proof threadlocker is an anaerobic adhesive designed to permanently secure threaded fasteners. Unlike removable threadlockers, it forms a rigid plastic-like bond that requires heat (>250°C) or mechanical force for disassembly. Developed for high-security applications, it prevents both vibrational loosening and unauthorized tampering. The product cures in the absence of air between tightly mated metal surfaces, typically reaching full strength in 24 hours. Major manufacturers include Henkel (Loctite 270), 3M, and Permabond. Industrial users prefer it for critical assemblies where fastener removal should be visibly detectable.
Physical and Chemical Properties
Tamper-proof threadlockers are methacrylate-based formulations with added toughening agents. They exhibit viscosity ranging from 500–2,500 mPa·s for controlled application. Cure speed depends on metal type—faster on active metals like steel versus passive metals like stainless steel. Once cured, the adhesive demonstrates tensile strengths exceeding 20 MPa and withstands temperatures from -50°C to +150°C. It resists oils, fuels, and most solvents except specialized strippers. The characteristic red color provides visual verification of application and serves as a tamper-evident marker.
Main Applications
Primary use cases include securing wheel bolts in public transportation, locking military equipment fasteners, and permanent assemblies in bridge structures. Aerospace applications require MIL-SPEC 46078C compliance for vibration resistance. The automotive sector uses it for drivetrain components like differential carrier bolts. Industrial applications cover heavy machinery bearing locks and conveyor system assemblies. Electronics manufacturers apply it to prevent tampering with security device housings.
Safety and Storage
Uncured adhesive is classified as flammable liquid (Flash point ~50°C). Use with adequate ventilation and nitrile gloves. Eye protection is mandatory due to risk of accidental splashing. Store containers upright with tightly closed lids to prevent premature curing. Shelf life is typically 12–18 months from production date. Bulk users should implement FIFO inventory management. Dispose of cured material as general plastic waste; uncured product requires hazardous waste processing.
B2B Procurement Guide
Industrial buyers should specify: 1) Required breakaway torque (measured in N·m), 2) Operating temperature range, 3) Metal compatibility, and 4) Any industry certifications needed (e.g., NSF, UL). For large-volume procurement (100+ kg), consider factory-direct purchases with customized viscosity or cure speed. Always request Material Safety Data Sheets (MSDS) and technical datasheets. Quality verification should include batch testing for cure strength and viscosity consistency.
Related Manufacturers
- 主营：导热硅脂、环氧树脂、单组份导热硅脂、固定灌封胶、水晶饰品胶、环氧胶粘剂、耐高温凝胶剂、环氧单组份胶、环氧树脂灌注结构胶、UV胶、单组份导热凝胶、单组份固定灌封胶、电子黄胶、双组份导热灌封胶、双组份导热凝胶、缠绕环氧树脂、手糊环氧树脂、叶片浇注环氧树脂、真空灌注环氧树脂
- 主营：安全门、编码器、研磨膏、高温胶、防水胶、密封胶、粘合剂、铝涂层、涂抹膏、机器人、调节垫、继电器、控制器、标记膏、密封剂、密封圈、门开关、差压表、扭簧机、磁力锁、操纵杆、传感器、润滑脂、固定漆、阀底座
- 主营：齿轮箱、过滤器、电磁阀、密封胶、橡胶接头、联轴器、编码器、进料泵、数显表、转换器、传动轴、差压开关、振动电机、工业键盘、扭矩扳手、液位开关、脚踏开关、夹具卡盘、热交换器、压力开关、顶尖夹具、伺服电机、励磁线圈、限位开关、传感器