Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

T24C64

Updated: 2026-07-22

Overview

The T24C64 is a 64Kbit serial EEPROM memory chip that uses the I2C communication protocol. It belongs to a family of non-volatile memory devices widely employed in electronic systems where small amounts of data need to be retained when power is removed. As an industry-standard component, the T24C64 offers reliable data storage with a minimum 100,000 write cycles endurance and data retention of 100 years. Its compact 8-pin package makes it suitable for space-constrained applications across various industries.

Structure and Working Principle

AT24C64D-SSHM-T 封装SOIC-8 MICROCHIP(美国微芯) 存储器 批次25+深圳市向阳芯城科技有限公司

The T24C64 consists of an array of floating gate transistors organized into 8192 bytes of 8 bits each. The memory cells can be individually addressed through the I2C interface, which uses just two wires (SCL for clock and SDA for data). Internally, the chip contains address latches, control logic, and high-voltage generation circuitry for programming operations. When writing data, an internal charge pump generates the necessary programming voltage (typically 12-14V) from the standard VCC supply (2.7V-5.5V). Read operations are performed at lower voltages without requiring the charge pump.

商家经验真实案例 · 安全可信
电动车把上感应器短接行不行
本文探讨电动车把手感应器短接的可行性与潜在影响,分析其工作原理及可能引发的安全问题,帮助用户理解这一操作的利弊。

Key Features

The T24C64 offers several advantages for embedded systems designers. Its low power consumption (standby current typically 1μA) makes it ideal for battery-powered devices. The wide operating voltage range supports both 3.3V and 5V systems. Additional features include hardware write protection (when WP pin is high), page write capability (up to 32 bytes per write cycle), and built-in error checking. The device operates across industrial temperature ranges (-40°C to +85°C), ensuring reliability in harsh environments.

Application Areas

This EEPROM finds extensive use in consumer electronics such as televisions, set-top boxes, and appliances for storing configuration data. Industrial applications include PLCs, sensors, and control systems where parameter storage is required. Automotive applications utilize the T24C64 for storing odometer data and ECU parameters. Medical devices employ these chips for equipment calibration data and usage logs. The component's small footprint and reliability make it popular across all these sectors.

Maintenance and Precautions

原装AT24C64D-XHM-T AT24C64D EEPROM存储器 MICROCHIP微芯 TSSOP8深圳市中芯巨能电子有限公司

Proper handling of T24C64 devices requires ESD precautions during installation and maintenance. While the chip is robust in normal operation, static discharge can damage the sensitive memory cells. System designers should implement proper I2C bus termination and follow signal integrity best practices. Write operations should be spaced with appropriate delays to meet timing specifications and extend the device's lifespan. Avoid exceeding maximum ratings for voltage and temperature during operation.

商家经验真实案例 · 安全可信
场效应管更换指南
本文详细介绍了nce4080场效应管的更换步骤和注意事项,包括工具准备、拆卸技巧、安装要点和常见问题规避,帮助您顺利完成更换工作。

B2B Procurement Guide

When sourcing T24C64 chips, verify the manufacturer's authenticity as counterfeit components exist in the market. Consider purchasing from authorized distributors or directly from the manufacturer for critical applications. Lead times can vary from stock availability to several weeks for large orders. Many suppliers offer tape-and-reel packaging for automated assembly. For reference, MOQ typically starts at 1,000 pieces, with prices decreasing significantly for orders above 10,000 units. Always request current datasheets to confirm specifications.

Related Manufacturers