Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Surface Mount TVS Diode

Updated: 2026-07-19

Overview

The P6SMB250CA is a surface-mount TVS diode from the P6SMB series, commonly used for protecting sensitive electronic components from transient voltage events. It is designed to clamp voltage spikes quickly, diverting excess current away from the protected circuit. The device is widely used in telecommunications, automotive electronics, and industrial control systems. With its compact SMB package, the P6SMB250CA is suitable for high-density PCB designs. It offers a balance of performance and cost-effectiveness, making it a popular choice for OEMs and circuit designers seeking reliable overvoltage protection solutions.

Structure and Working Principle

赛米微尔 P6SMB250CA双向TVS管 SMB封装600W保护二极管赛米微尔半导体(上海)有限公司

The P6SMB250CA consists of a silicon avalanche diode structure optimized for fast response to voltage transients. When the voltage across the device exceeds its breakdown voltage, it enters avalanche mode, providing a low-impedance path for the transient current. The diode's bi-directional design allows it to protect against both positive and negative voltage spikes. Its rapid response time (typically less than 1 picosecond) ensures sensitive components are protected before damage can occur. The device's performance is characterized by its breakdown voltage, clamping voltage, and peak pulse current capability.

商家经验真实案例 · 安全可信
UT探伤级别解析
本文详细解析超声波探伤(UT)中一级与二级的区别,包括检测深度、精度要求及适用场景,帮助读者快速理解不同级别的实际应用价值。

Key Features

The P6SMB250CA offers a standoff voltage of 250V with a breakdown voltage range of 278V to 308V. Its peak pulse power dissipation is 600W (8/20μs waveform), making it suitable for moderate to high-energy transients. Notable features include low leakage current (typically <1μA at working voltage) and excellent clamping capability. The device maintains stable performance across a wide temperature range (-55°C to +150°C) and is compliant with RoHS standards for environmental safety.

Application Areas

Primary applications include protection of data lines, power supplies, and I/O ports in telecommunications equipment. It's commonly used in Ethernet ports, USB interfaces, and RS-485 communication lines. The diode is also employed in automotive electronics for protecting CAN bus systems and infotainment components. Industrial applications include PLCs, motor drives, and sensor interfaces where electrical noise and voltage spikes are common challenges.

Maintenance and Precautions

TVS二极管P6SMB250CA JD 晶导微 250CSMB 瞬态抑制管国丰临科技(深圳)有限公司

The P6SMB250CA requires minimal maintenance as it's a solid-state device. However, proper PCB layout is crucial - place the device as close as possible to the protected line and ensure low-impedance connections to ground. When handling, observe standard ESD precautions. The device should not be subjected to mechanical stress during installation. For optimal performance, ensure the working voltage does not exceed the maximum reverse standoff voltage specified in the datasheet.

商家经验真实案例 · 安全可信
给灯接两根零伏会亮吗
本文解答了关于给灯接两根零伏是否会亮的问题,解释了电压的基本概念、电路的构成原理以及灯泡发光的必要条件,帮助读者理解电学基础知识。

B2B Procurement Guide

When procuring P6SMB250CA diodes in bulk, verify the manufacturer's certification and request batch testing reports if required. Lead times typically range from 4-8 weeks for large orders. Consider purchasing from authorized distributors to ensure authenticity. Many suppliers offer tape-and-reel packaging for automated assembly. For reference, MOQ is commonly 1,000 pieces, with price breaks at 10,000 and 50,000 unit quantities.

Related Manufacturers