Aicaigou LogoB2B WikiIndustrial Encyclopedia

Submersible Temperature and Level Sensor

Updated: 2026-08-28

Overview

The submersible water temperature and level sensor is a specialized instrument designed for continuous monitoring of water bodies. These devices combine hydrostatic pressure measurement for depth detection with integrated temperature sensors, providing comprehensive water data. Widely used in industrial, agricultural and environmental applications, these sensors offer reliable performance in challenging conditions. Their robust construction allows for long-term submersion without degradation of measurement accuracy or sensor integrity.

Structure and Working Principle

不锈钢投入式水温测试仪 精确测量 水位传感器 电子水位计深圳市东方万和仪表有限公司

The sensor typically consists of a stainless steel probe housing the pressure transducer and temperature sensor, connected to a cable for data transmission. The pressure sensor measures hydrostatic pressure, which is converted to water level based on water density. The temperature measurement is usually achieved through a precision thermistor or RTD (Resistance Temperature Detector) integrated into the probe. Modern versions often include signal conditioning electronics within the probe head, providing standardized output signals (4-20mA, 0-5V, or digital protocols) for easy integration with monitoring systems.

商家经验真实案例 · 安全可信
液位报警全解析:高低警报的秘密
本文解析液位高低报警原理,涵盖传感器类型、常见故障原因及排查方法,帮助读者快速定位问题,保障设备正常运行。

Key Features

High accuracy is a hallmark of quality submersible sensors, with typical level accuracy of ±0.1% FS and temperature accuracy of ±0.5°C. The best models maintain this precision across wide operating ranges (-20°C to 80°C for temperature, up to 100m depth for level measurement). Corrosion resistance is achieved through 316 stainless steel construction and specialized coatings. Many models feature automatic compensation for atmospheric pressure changes, eliminating the need for vented cables in most applications. Some advanced versions include anti-fouling mechanisms to prevent biological growth that could affect measurements.

Application Areas

These sensors are essential in water resource management, monitoring reservoirs, rivers and groundwater levels. They're widely used in wastewater treatment plants for process control and compliance monitoring. In agriculture, they enable precise irrigation management through soil moisture correlation. Industrial applications include boiler water level monitoring and cooling tower management. The aquaculture industry relies on them for maintaining optimal water conditions in fish farms and hatcheries.

Maintenance and Precautions

恒瑞投入式水位计 压力式液位计 水位水温一体监测陕西恒瑞测控系统有限公司

Regular inspection is recommended to check for cable damage or probe fouling. Annual calibration is advised for critical applications, though many modern sensors maintain stability for several years. Avoid exposing the sensor to water hammer effects or rapid pressure changes that could damage the diaphragm. When installing in potentially freezing conditions, ensure the sensor is positioned below the ice formation depth. For long cable runs, use properly shielded cables to prevent signal interference.

商家经验真实案例 · 安全可信
水温计测气温?真相在这里
水温计设计用于测水温,其测量范围和精度针对液体设计,测气温可能误差大甚至损坏。本文解析水温计与气温计差异,助你科学使用。

B2B Procurement Guide

When sourcing these sensors, specify required measurement ranges (both depth and temperature), accuracy class, and output signal type needed for your system integration. Consider the chemical composition of the measured liquid as it may require special materials. Evaluate manufacturer certifications (such as IP68 waterproof rating) and request documentation of calibration procedures. For large orders, inquire about customized cable lengths or connector types. Lead times typically range from 2-6 weeks, with premium brands commanding 20-30% higher prices but offering better long-term reliability.

Related Manufacturers