Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Stud Diode

Updated: 2026-08-07

Overview

A bolt diode is a heavy-duty rectifier diode designed for high-current applications. Its threaded bolt base allows for secure mechanical attachment to heat sinks or chassis, improving thermal performance. Unlike smaller diodes, bolt diodes are built to handle power circuits, often found in industrial machinery, power supplies, and automotive systems. These diodes are typically constructed with silicon semiconductor material due to its high temperature tolerance and efficiency. The bolt design not only aids in heat dissipation but also ensures stable electrical connections in high-vibration environments.

Structure and Working Principle

螺栓二极管ZP200A/2000V现货直发 瑞新25年品质西安瑞新电力电子有限责任公司

Bolt diodes consist of a PN junction semiconductor housed in a metal case with a threaded stud. The stud serves as both the cathode connection and a mounting point. When forward-biased, the diode allows current flow during the positive half-cycle of AC voltage, blocking it during the negative half-cycle (rectification). Heat dissipation is critical for bolt diodes. Their large metal casing and threaded base transfer heat to external heat sinks, preventing thermal runaway. Some models incorporate multiple silicon wafers in parallel to increase current capacity up to several hundred amps.

商家经验真实案例 · 安全可信
四开单控开关解析
本文详细解释四开单控开关的含义、功能及适用场景,帮助读者理解其在电路控制中的作用,并对比多控开关的差异,提供选购时的实用建议。

Key Features

Bolt diodes offer several advantages over standard diodes. Their threaded mounting provides mechanical stability in high-vibration industrial environments. The design allows for efficient heat transfer, enabling higher current ratings—typically 10A to 300A or more. These diodes often feature rugged packaging resistant to moisture and contaminants. Reverse voltage ratings range from 50V to over 1000V. Some variants include built-in thermal protection or are configured in bridge rectifier assemblies for three-phase systems.

Application Areas

Bolt diodes are widely used in power conversion systems. They are essential components in welding equipment, battery chargers, and motor drives where high-current rectification is required. Industrial power supplies and renewable energy systems (solar/wind) rely on them for DC conversion. In automotive applications, bolt diodes regulate alternator output. They also serve in traction systems for electric vehicles and rail transport. Heavy machinery often uses these diodes for braking resistor circuits and dynamic braking systems.

Maintenance and Precautions

供应德国西门康原装螺栓二极管模块SKR135F /08-12 SKR136F/08-12昆山奇沃电子有限公司

Proper installation is crucial for bolt diodes. Always use thermal paste between the diode and heat sink to maximize heat transfer. Ensure mounting surfaces are clean and flat. Tighten the bolt to the manufacturer's specified torque to avoid damage. Monitor operating temperature—exceeding 150°C (for silicon diodes) may cause failure. In systems with inductive loads, use protective snubber circuits to prevent voltage spikes. Regularly inspect for signs of overheating (discoloration) or loose connections.

商家经验真实案例 · 安全可信
10A400V快恢复二极管怎么选
本文针对10A400V快恢复二极管的选型需求,从参数匹配、典型应用场景和散热设计三方面提供实用建议,帮助工程师在电源设计中做出合理选择。

B2B Procurement Guide

When sourcing bolt diodes commercially, verify current/voltage ratings match your application's worst-case scenarios. Consider surge current tolerance if used with inductive loads. For high-reliability systems, request MTBF (Mean Time Between Failures) data from suppliers. Standard packaging options include bulk packs (100+ units) or reels for automated assembly. Lead times vary; common variants are often stocked, while custom configurations may require 4-8 weeks. Always request RoHS/REACH compliance documentation for international shipments.

Related Manufacturers