Stone Fork Attachment

Overview

Stone handling forks are heavy-duty attachments engineered for the stone industry, where traditional forks may fail due to extreme point loads or abrasive surfaces. They are mounted onto forklifts, telehandlers, or wheel loaders to streamline the movement of granite, marble, limestone, and other stone products. Unlike standard forks, their design incorporates thicker tines, often with tapered tips for easier insertion beneath stacked stone. These tools are indispensable in supply chains involving raw stone blocks from quarries to processing facilities, as well as finished slabs in fabrication workshops. Their robust construction minimizes downtime and damage to expensive stone materials during handling.

Structure and Working Principle

莱州鼎森机械有限公司

A stone fork consists of a horizontal frame (carriage) that attaches to the host machine’s hydraulic system, paired with two or more vertical tines. The tines are typically 60–120 cm long, with thicknesses ranging from 30–80 mm to resist bending. High-quality models include replaceable heel guards to protect against abrasion. Operation relies on the host machine’s hydraulics to tilt and lift the forks. The tines slide beneath stone pallets or directly under slabs (using spacers), distributing weight evenly. Some advanced forks feature hydraulic width adjustment to accommodate varying load sizes without manual intervention.

商家经验真实案例 · 安全可信

小铲车超车厢运输全解析

本文探讨小铲车装小轻卡运输时超出车厢的可行性，分析安全风险、法律隐患及优化方案，助你合法合规完成运输任务。

Key Features

Durability is paramount: premium stone forks use quenched and tempered steel (e.g., Hardox) with optional tungsten carbide coatings to extend service life. Load capacities typically range from 2–5 tons per pair, with reinforced backplates to prevent buckling. Ergonomic designs include tapered tine tips for easier insertion and non-slip surfaces to stabilize loads. For safety, many forks integrate LED lights or reflectors for low-visibility environments. Customizable options may include fork length extensions or specialized coatings for acidic/wet conditions.

Application Areas

Primary users include quarry operators moving raw blocks, stone distributors handling palletized slabs, and construction firms installing heavy stone cladding. They are also used in monument manufacturing and landscaping for large stone features. In processing plants, these forks facilitate transitions between cutting, polishing, and storage stations. Their precision reduces the risk of edge chipping compared to sling-based methods. Some models are adapted for double-sided handling of polished slabs without surface damage.

Maintenance and Precautions

莱州鼎森机械有限公司

Regularly inspect tines for stress cracks or excessive wear, especially at stress points near the heel. Lubricate pivot points (if adjustable) and check hydraulic connections for leaks. Replace worn heel guards promptly to avoid structural damage. Always verify load weight before operation and ensure even distribution. Avoid dragging forks on the ground, which accelerates wear. For corrosive environments (e.g., coastal areas), rinse salt deposits and apply anti-rust treatments. Store forks elevated to prevent ground moisture contact.

商家经验真实案例 · 安全可信

老式手电钻夹头拆解指南

本文详细解答老式手电钻夹头的螺纹方向辨别方法，提供三种实用拆卸技巧，并分享操作过程中的注意事项，帮助您轻松完成夹头维护或更换。

B2B Procurement Guide

When sourcing stone forks, confirm compatibility with your machinery’s mounting system (e.g., Euro hook, CLAAS). Request load test certificates and material composition reports for quality assurance. Lead times for custom orders (e.g., extra-long tines) may extend to 6–8 weeks. Bulk purchases (10+ units) often attract 10–15% discounts. Consider total cost of ownership: cheaper forks may lack replaceable parts, increasing long-term expenses. Verify supplier after-sales support, including warranty coverage for structural defects. Top manufacturers include Paladin Attachments, Bradshaw, and HLA.